Epoxy resin is a clear, odorless liquid that will solidify into a white or light-colored hard material. This type of resin is used to create artwork and craft projects like jewelry and figurines.
In this blog post, we will go over the steps for suspending objects in epoxy resin so you can get started on your own project!
How Do I Suspend Something In Resin?
- Have your objects ready. If you are suspending multiple items, make sure they all have a flat side so the surface can be even on both sides once it’s suspended in resin.
- Pour clear epoxy into an empty container (a sealable jar or disposable cup) that is about double the size of what you need for one layer of resin to cover your object. Make sure there are at least two inches from the top edge of the container to where you’re going to suspend your object and four inches if using a glass dish with high edges. This will create enough space between layers while still being able to see through it without any obstruction when looking down onto your item(s).
- Add small amounts of your desired color of pigment to the resin.
- If you’re using a jar, gently swirl the containers so that any clumps dissolve and continue adding in small amounts until your entire object is covered by some amount of the epoxy mixture. You can use something like a toothpick or straw to add more than one line if necessary because it will all mix together when mixed completely with water later on. When suspending multiple objects, make sure they are evenly spaced out enough from each other for them not to touch or overlap while still being able to see into it without obstruction.
Table of Contents
- How Do I Suspend Something In Resin?
- How Do You Keep Objects From Floating In Resin?
- How Do You Encase Something In Epoxy?
- Can Epoxy Resin Stop A Bullet?
- Can You See The Fishing Line In Epoxy Resin?
- How Do You Keep Bugs From Floating In Resin?
- Can I Put A Photo In Resin?
- Can Fresh Flowers Be Used With Resin?
- What Is The Best Epoxy Resin For Casting?
- How Do I Add Objects To Resin?
- How Do You Attach Shells To Resin?
- How To Make Things Float In Resin?
How Do You Keep Objects From Floating In Resin?
The best way to keep objects from floating is by adding weight. This can be anything that will not shift in the resin and remains fully submerged while being able to see through it with no obstruction. Some items include:
- glitter, sand, or other small pieces of material (make sure any glitter you use doesn’t have excess glue on them)
- crushed up cereal box cardboard covered with epoxy
- plastic bugs or toy fish filled with liquid epoxy inside before placing into the container if desired!
A suitable alternative for suspending multiple objects is using an object like wood skewers which are inserted around your intended item(s).
You’ll need enough so they’re slightly spaced out to avoid overlap and secure them once they’re in place by using hot glue or another appropriate type of adhesive.
How Do You Encase Something In Epoxy?
To encase something in epoxy, you’ll need to do the following:
Take a sealable jar or disposable cup made of plastic and fill it with about an inch from the top edge.
Pour clear epoxy into your container until it reaches halfway up on one side (this depends on how much resin you have used).
Add two teaspoons of water so that the mixture will thin out. Mix well by swirling or using a toothpick to make sure all clumps are dissolved before adding more water if necessary. Add any desired color pigments for decoration purposes.
If this is not being done then add at least ten drops of food coloring for better visibility while suspending objects but shouldn’t be necessary otherwise as long as there is enough space between objects to see through.
Once the desired amount is in there, add more of your clear epoxy resin until it reaches just over two inches from the edge, and mix any remaining clumps into a smooth paste before adding one layer on top of another.
If you are not using food coloring then make sure colors do not overlap or touch each other because they will create an irreversible mess!
It’s also best to use a glass dish with high edges instead for this process if possible so that everything can be seen without obstruction while suspending items above water.
Can Epoxy Resin Stop A Bullet?
It’s unlikely that epoxy resin would stop a bullet, but there are other types of resins that can be used to create armor.
It is possible for the object being suspended in it to break or shatter under strong enough impact so care should be taken when handling them or they could fall into pieces!
This will depend on what materials you use and how much weight was added before molding as well.
Can You See The Fishing Line In Epoxy Resin?
The fishing line will show up in epoxy resin, so it’s not necessary to use something like a glue stick as an alternative for suspending objects.
It is possible for this type of object to come undone or even break because the fishing line could stretch too far before snapping back and breaking on impact but can be made stronger by tying knots at intervals along the lines beforehand!
How Do You Keep Bugs From Floating In Resin?
This will depend on the type of bug, but a favorite way to fix this is by placing them in liquid epoxy before or after adding them into the container.
This ensures they won’t float and can be seen without obstruction while suspended as well!
Can I Put A Photo In Resin?
It is possible to place photos in epoxy resin but it will depend on what type of camera you take the picture with.
If it was taken by a DSLR then use your editing software before printing and make sure that all edges are properly lined up before placing them into the container for best results!
Can Fresh Flowers Be Used With Resin?
Fresh flowers can be used with resin but they will need to be dried beforehand for a better result.
A little sand or ferns should also work well as long as it’s not too heavy where the object might break under the impact!
What Is The Best Epoxy Resin For Casting?
The best epoxy resin for casting is the one that will create a strong and durable finish, but this can depend on the amount of weight or pressure being applied.
What are some precautions to take when using epoxy?
- Mold should be made in an area where it’s safe from any dust particles because they’ll show up as tiny air bubbles.
- Epoxy doesn’t have a long working time; make sure you’re happy with what you’ve created before adding more material to avoid hassle later due to breakage while handling them in their fragile state.
- Make sure there’s enough space between items if not using food coloring so that colors don’t overlap or touch each other since these conditions could cause irreversible damage
- It’s recommended to use a glass dish with high edges for this process if possible so that everything can be seen without obstruction and items won’t get stuck on the lip of the container.
How Do I Add Objects To Resin?
To add objects to resin, make sure that they are submerged in the mixture as deeply as possible without allowing them to touch anything else.
If you’re using food coloring then be sure to mix any remaining clumps into a smooth paste before adding layers on top of each other and do not allow colors to overlap or touch each other because this will cause irreversible damage!
How Do You Attach Shells To Resin?
If you’re adding shells to resin, they should be submerged in the mixture without allowing them to touch each other.
Careful with how much weight is placed on top of the items because it could cause a break or shatter under strong enough pressure!
How do I create an underwater scene?
For this process, use any type of object from found materials like sandpaper and wood scraps as well as felt furniture pads that have been cut into shapes such as stars or hearts for best results.
Ensure that these objects are weighted down while leaving room for smaller pieces like flowers to float above water before applying epoxy so that all can be seen without obstruction!
How To Make Things Float In Resin?
To make items float in resin, they’ll need to be weighted down with a small piece of fishing line so that it keeps them submerged while still being able to see all the colors.
Be careful not to add too much weight or pressure because it could break under these conditions!
For best results, submerge objects first then lay some lines out for others; this will help create more detail and less chance of breaking from an impact later on!
How can I keep bugs afloat?
Bugs such as ants should have enough space between them before adding into the mixture when using food coloring but otherwise use liquid epoxy beforehand which will ensure that they don’t touch each other during any impacts caused by sudden movements while handling fragile pieces!
What are some objects that can’t be suspended in resin?
Anything with sharp edges should not go into the mixture or else it might break when being handled.
Objects such as metal nuts and bolts, and glass pieces will also need to be avoided because they’ll stick out of the surface like a sore thumb!
It’s best to use water-based gel mediums before adding anything heavy so that epoxy doesn’t continue flowing during this process which could cause irreparable damages later on!