How do you keep epoxy clear?

You can keep epoxy clear by storing it in opaque containers, preventing temperature fluctuations, and using UV light-blocking resin.

If you are making epoxy jewelry, you should be using the best quality resin to prevent cloudiness or yellowing. Epoxy resin has many different uses in crafting and construction projects.

How do you keep epoxy clear?

  • The easiest way is to use a UV inhibitor. The inhibitor is added to the resin before it cures and helps to prevent yellowing and clouding, which are caused by exposure to ultraviolet light. You can find these inhibitors at hardware stores or online retailers.

How do you keep epoxy resin clear?

If you’re trying to keep your project clear, then it’s best to avoid UV exposure. This can be done in a number of ways:

  • Use a UV resistant epoxy
  • Use a UV resistant epoxy additive
  • Use a UV resistant resin
  • Use a UV resistant pigment
  • Use a UV resistant dye
  • Use a UV resistant hardener
  • Use a UV resistant catalyst

How do you stop epoxy from being cloudy?

  • Add more epoxy. The easiest and most effective thing you can do is simply add more epoxy to the surface, and then spread it around again as thinly as possible. Once you’re done spreading, keep your heat lamp in one position directly on top of the epoxy, and let that area harden completely before moving the lamp to a different section. Repeat this until the entire surface is dry, making sure to keep all of your tools clean at all times.
  • Use a heat lamp to cure the epoxy for longer than usual (15 hours instead of 3), or several heat lamps if you don’t have a large enough one for your project size.
  • Mix the epoxy for longer – try 12-14 minutes instead of 3-5 minutes, or use a drill with a mixing paddle if necessary
  • Add more catalyst – this will speed up curing time and make it harder to achieve a cloudy finish
  • Mix the epoxy much less quickly (around 100 rpm instead of 1000) and watch out for air bubbles forming during mixing because they can cause cloudiness too! You could also try using less hardener or using another brand or type altogether – some brands are known for having better clarity than others so look into those!

How do you make epoxy not yellow?

Yellowing is usually caused by too much heat or UV rays. If you are using a torch, you want to make sure that you don’t apply too much heat to the epoxy for too long. This will cause the epoxy to be yellow.

Heat is also produced by sunlight and lamps. So, it is recommended that you keep your resin out of direct sunlight and ideally use a UV light stabilizer in your epoxy mixes since this will help prevent yellowing from sun exposure or artificial lights.

Some people believe that if they add more UV stabilizers to their epoxy mix, they can leave their project outside longer and it won’t yellow as much but this isn’t true!

Too much UV stabilizer can actually cause the opposite effect – your project will turn a dark color over time like black or amber (a dark orange/brown). So be sure not to add too much UV stabilizer because it can potentially be harmful to your project!

Why does my epoxy look cloudy?

The first step to eliminating cloudy epoxy is to make sure the hardener is evenly dispersed throughout the epoxy resin. Mixing the hardener into a tiny bit of epoxy resin and then gradually adding more as you stir it will ensure that every part of the mixture has had equal contact with heat and oxygen.

While working, keep an eye on your temperature so that you don’t accidentally overheat your plastic (or worse, yourself).

Another important step is to allow your epoxy to cure until it becomes clear or white—which will take from 30 minutes to several hours depending on how much time you’ve spent stirring, the temperature in your room, and the weather outside.

How do you keep epoxy shiny?

There are numerous ways to polish your epoxy. First, you need to make sure that you have the proper polishing compound for your specific project.

Once you have decided on what kind of compound you want to use, there are a variety of tools and methods for polishing.

You can use a rotating polishing pad on a drill; it is rather easy to do and will give you good results. You can also use a rotary buffer with an epoxy-safe buffing pad; this is the industry-standard method used by professionals and works very well.

A third option would be using a heat gun or cloth/sponge in conjunction with the appropriate abrasive compounds to gently heat up the epoxy surface until it softens up slightly then polish away any haze that has formed. It should look shiny again!

How do you make epoxy clear after sanding?

Epoxy resin can be sanded. However, if you sand your epoxy resin after it has cured, it will dull the shine and make it cloudy. But there are ways to polish your resin back to a glossy sheen!

There are two things you can do:

How do you get crystal clear resin?

This is a question that inevitably surfaces for those who have done their first epoxy projects and think they’ve got it all figured out.

Unfortunately, most people can end up with a cloudy kitchen surface, not to mention having to clean up the mess and go through a haze of sawdust as they try to scrape off what’s left of the residue.

A lot of it is due to how poorly many epoxy makers recommend using their products—and how easy it is for even experienced DIYers to make mistakes (or get lazy).


Keeping your epoxy clear is not a walk in the park. There are many factors that can cause it to get cloudy, yellow, or even brown.

However, we have provided you with some tips on how you can keep your epoxy crystal clear. These include:

  • Adding UV inhibitor
  • Keeping it warm during the curing process
  • Applying the resin at the right thickness
  • Use a non-yellowing resin
  • Use a high-quality grade epoxy
  • Choosing the right hardener for your resin and hardener ratio and mix them thoroughly. Also, remember not to add in any extra material such as colorants when using an amine blush remover after applying the second coat of epoxy since this could affect its effectiveness! Finally, use proper tools like those recommended by manufacturers so that they last longer than those which might break down quickly when exposed over time!
Photo of author

Martin Flood

Martin Flood has been working in the construction industry for over 20 years as a general contractor with expertise in remodeling projects that are large or small. He has furthered his career by specializing in epoxy resin flooring, providing excellent service to both commercial and residential clients. Martin’s experience enables him to offer professional advice on how to choose the right type of project based on your needs and budget.

Leave a Comment