Epoxy floors are a great option for many reasons: they’re durable, easy to clean and maintain, and aesthetically pleasing.
However, if you aren’t diligent about cleaning them on a regular basis, it can be damaging for both the floor and its surrounding area. If you’re looking for more information on how to clean your epoxy flooring in order to keep it in good condition for years to come, this article will give you the necessary tools.
An epoxy resin is a chemical compound that can be used as an adhesive or coating material on different types of substrates (e.g., metal or wood).
Epoxies have been around since the 1950s but weren’t used much until recently because they’re very expensive compared to alternative materials like polyurethane sealants or acrylic glues that work just as well without leaving behind any residue when dry-cleaning processes such as vacuuming aren’t performed regularly enough–and that’s why we need this guide!
How do you clean an epoxy resin floor?
- Use a broom or microfiber mop to remove dry dirt.
- Use a vacuum to pick up wet and dry particles.
- Use an all-purpose floor cleaner to remove spots, stains, and scuffs. You can also use degreasers on greasy areas but be careful not to allow them to remain wet too long as they will damage the surface of your epoxy resin flooring!
- Use soft cloths and mild detergents (like dish soap) on stubborn spots only if necessary—you don’t want any harsh cleaners in contact with your floors for long periods of time because they might leave behind streaks or residue which can dull the finish over time!
Table of Contents
How can I make my epoxy floor shine again?
Now that you know how to clean your epoxy floors, the next step is to make them shine. To do this, first, clean the floor with a microfiber mop.
Then use a squeegee to remove excess water and buff with a microfiber cloth. Finally, use the right cleaner and/or floor burnisher depending on what type of floor you have (you can find more information here).
Can you use Swiffer on epoxy floor?
The Swiffer is a wet cloth mop that uses a cleaning solution to clean floors. It does not scratch the floor, and it removes dirt quite well.
The only issue with the Swiffer is whether or not it will leave streaks on your epoxy floors. If you use one of the recommended cleaners for epoxy flooring (below), you should be able to successfully clean your indoor epoxy floors with this product.
If you want to use your Swiffer on an outdoor deck, however, there are some things to consider before purchasing it:
- Make sure that the wood surface can withstand water and moisture; if not, then the wood might warp or become damaged by moisture over time
- Be mindful of how much pressure you apply when mopping with a cloth mop like this one
Are epoxy floors easy to clean?
For the most part, epoxy floors are easy to clean. They are non-porous and do not absorb liquids or dirt, so they can be cleaned with a damp mop. You can also use a broom to sweep up dust and debris that have fallen onto the floor.
What cleaner can I use on epoxy floor?
- You can use a damp mop and a neutral cleaner to clean epoxy floor.
- Avoid abrasives.
- Use a dry mop to dust the floor after cleaning it with water.
- Use a vacuum cleaner to remove any dirt that is stuck in between the cracks of your epoxy floor
What do you clean epoxy with?
A mild detergent and water mixture is the best solution for cleaning epoxy floors. You can use a damp mop to remove dirt or a soft mop or cloth for dusting.
A soft bristle brush will work well on hard-to-reach spots, but it shouldn’t be used on the entire floor. If you do use a steel brush, make sure to avoid scratching your epoxy flooring as much as possible! And never use bleach as this may damage your flooring material over time.
Finally, avoid using a vacuum cleaner because the suction could lift up and scratch off some of that shiny surface layer of epoxy!
How do you fix a cloudy epoxy floor?
- Use a microfiber towel.
- Don’t use harsh chemicals.
- Use an epoxy polish.
- Use a buffer and commercial floor cleaner if necessary, but don’t do this often because it can harm your floors over time.
- Vinegar is another great option, as long as you mix it with warm water in equal parts before using it on the floors. This mixture will help remove any build-up from previous cleaners or spills, allowing you to get back to the original shine of your newly installed epoxy floors!
Can you use Pine Sol on epoxy floors?
It’s possible to use Pine Sol on epoxy floors, but it’s not recommended. You’ll have a dull finish and any scratches will be hard to fix.
Instead, try vinegar or Windex, both of which are good at removing stains from your floor. Vinegar is a natural alternative to antibacterial cleaners and works well for cleaning the kitchen.
You can even mix it with baking soda and make a homemade floor cleaner that works wonders on tough stains like oil spills or paint splatterings
Conclusion
As you can see, it’s pretty easy to clean epoxy floors. All you need is a neutral cleaner and a mop, broom, or pressure washer. You should not use soap, vinegar, or bleach on your epoxy flooring. Even ammonia isn’t recommended as it can damage the surface of the flooring over time.