When you are looking to purchase an epoxy resin tumbler, it is important to get the right amount of resin.
If you do not purchase enough, your tumbler will not be fully coated and it will not be as durable.
If you purchase too much resin, you will end up wasting money. In this blog post, we will help you determine how much resin you need for your specific project.
Is one layer of epoxy enough for a tumbler?
Most likely, one layer of epoxy will be enough to coat your tumbler. Make sure to follow the instructions on the resin’s packaging so you can get the best results.
If you are looking for a more durable finish, however, you may want to consider applying two coats of epoxy instead.
This will give your tumbler an extra layer of protection against wear and tear.
Table of Contents
- Is one layer of epoxy enough for a tumbler?
- How do you mix epoxy resin for tumblers?
- What are the measurements for epoxy resin?
- Do you use epoxy or resin for tumblers?
- How long do you let epoxy dry on Tumblr?
- How do you get a smooth epoxy finish on a tumbler?
- how much epoxy for a 12 oz tumbler?
- how much epoxy for a 30 oz tumbler?
- how to make tumbler cups with epoxy?
- how to epoxy a tumbler with vinyl?
- how to epoxy a tumbler without a rotisserie?
- how to paint and epoxy a tumbler?
How do you mix epoxy resin for tumblers?
To mix epoxy resin for tumblers, you will need to use a two-part system. The first part is the resin, and the second part is the hardener.
You will need to measure these parts accurately so that the mixture cures properly.
Always follow the manufacturer’s instructions when mixing epoxy resin. This will ensure that you get the best results possible.
In general, you will need about two ounces of resin and one ounce of hardener per tumbler.
However, it is always best to measure this yourself so that you can be sure.
What are the measurements for epoxy resin?
Epoxy resin is measured in tablespoons. For every one tablespoon of epoxy resin, you will need two tablespoons of hardener.
The measurements for the tumbler are as follows: the height is nine inches, and the diameter is three inches.
The total volume of the tumbler is twenty-seven cubic inches.
To find out how much epoxy resin you will need, divide the total volume by the number of tablespoons in a cup (eight).
This will give you approximately three and a half tablespoons of epoxy resin needed for this project.
Remember to also use two tablespoons of hardener per tablespoon of epoxy resin. So, in total, you will need seven tablespoons of hardener for this project.
Do you use epoxy or resin for tumblers?
No, it’s not necessary to use epoxy or resin on tumblers. You can just use the paint and sealer that’s recommended in our tutorials (or any other brand) without adding anything else.
That said – some crafters like to add extra protection by using a clear coat on top of everything they make!
Epoxy resin is one way you could do this but there are also others such as spray lacquer or even acrylic varnish applied with a brush if you wanted something more durable than regular craft paints might be able to provide alone; plus those methods would still allow for easy removal should someone want their mug back later down the line when all has been said done.
How long do you let epoxy dry on Tumblr?
We recommend allowing 24 hours for each coat of epoxy to cure. This is assuming that the ideal temperature range has been maintained in a dust-free room and there are no obstructions or contaminants on your tumbler surface.
If you are unable to get access to a dust-free environment, it may be better to wait 48 hours between coats.
How do you get a smooth epoxy finish on a tumbler?
To get a smooth epoxy finish on your tumbler, you need to work faster than the recommended working time. The recommended working time for resin is 45 minutes at 70 degrees Fahrenheit.
For example, if it takes you about 20 minutes to pour and spread out one layer of resin (sometimes longer), then the second layer will start curing before you can even mix and apply it!
Therefore, we recommend that when using our 100% solids epoxy resin for coating tumblers or cups, you take into account your pouring speed and plan accordingly so that each layer cures properly without any air bubbles in between layers.
how much epoxy for a 12 oz tumbler?
calculated how much epoxy you need for each glass tumbler. we used a 12 oz 30oz and 60 oz cup to figure it out.
now it’s easy with this chart below to calculate the amount of resin needed for your cups!
how much epoxy for a 30 oz tumbler?
You will need to use an epoxy calculator, but it should take about 50 ml of resin per cup of volume.
For a 30 oz mug, you will need just over one and a half cups (24 fl oz) or 34 ounces in the metric system.
However, if you’re planning on using colored pigments with your project then there are some additional considerations that may affect how much epoxy resin you end up needing to cover all surfaces fully!
These include things like whether or not they have glitter mixed into them as well as what type and amount of colorant are used when making said pigments.
how to make tumbler cups with epoxy?
Epoxy resin is a great way to create custom tumbler cups. You will need approximately two ounces of epoxy resin for each cup you want to make.
Be sure to mix the epoxy resin thoroughly before using it.
To create your tumbler cups, start by mixing the epoxy resin and hardener together according to the instructions on the packaging.
Then, use a disposable spoon or craft stick to apply the epoxy mixture to the bottom of your cups. Make sure to coat the entire surface evenly.
Next, place your cups upside down on a piece of wax paper and let them dry overnight.
The next day, you can add whatever designs or decorations you like! We recommend using acrylic paint or nail polish.
Be sure to let the cups dry completely before using them. Enjoy your custom tumbler cups!
how to epoxy a tumbler with vinyl?
There are a few ways to epoxy a tumbler with vinyl. The first is to measure the circumference of the tumbler and then purchase an equal amount of epoxy resin.
The second option is to purchase a kit that includes everything needed, including the right amount of epoxy resin.
Finally, some people choose to mix their own epoxy resin using two-part epoxy resin kits.
This gives you more control over the final product but it can also be more difficult.
No matter which method you choose, make sure to follow all instructions carefully for the best results.
how to epoxy a tumbler without a rotisserie?
There are a few ways to epoxy a tumbler without using a rotisserie. One way is to use the oven method.
Preheat your oven to 350 degrees Fahrenheit and place your tumbler on the middle rack.
Bake for 30 minutes or until the resin has set. Another way is to use a heat gun.
Place your tumbler in an area where you can safely apply heat, such as outside or in a well-ventilated area.
Hold the heat gun about six inches from the tumbler and move it around until the resin has melted and spread evenly over the surface of the glass. Let cool completely before handling. A third way is to use a slow cooker.
Pour enough epoxy resin into your slow cooker to fully submerge the base of your tumbler.
Set it on high for three hours or until the resin is melted and spread evenly over every surface of your glassware item, turning off at any point during this process if you want to mix in glitter or mica powder into the mixture before continuing with heating again.
Last but not least would be using a microwave. Place one tablespoon per ounce of epoxy onto an old plate (or paper plate) and then put it in a microwaveable container such as Pyrex measuring cups that have been cleaned out thoroughly after their last use so there are no remnants left behind from food items previously cooked up).
Microwave for 30 seconds at full power; stir well until smooth consistency returns.
If needed, microwave again in five-second increments but do not exceed one minute total microwaving time. Let cool before using.
how to paint and epoxy a tumbler?
When it comes to painting and epoxying a tumbler, there are a few things you need to keep in mind.
First, make sure the surface of the tumbler is clean and free of debris.
You may also want to sand down any rough patches or areas that have been scratched up.
Once the surface is ready, mix together your resin and hardener according to the instructions on the package.
Then, using a brush or roller, coat the entire surface of the tumbler with epoxy resin. Let it dry completely before use.