how much does it cost to epoxy a bathtub?

Bathtubs are one of the most used parts of your bathroom. This means that they need to be in great shape so that you can get a comfortable and relaxing bath every time.

When it comes to maintaining your bathtub, there are many things that you can do to keep it looking new or even better than before. One way is by applying an epoxy coating on top of the tub.

This is a great way to ensure that the tub stays strong and doesn’t rust over time so that you can use it for many years without having to worry about replacing it anytime soon.

How long does epoxy last in bathtub?

Epoxy is the best material to use when coating a bathtub. It can last up to 10 years, depending on how well you take care of it.

How much does it cost to coat a bathtub?

The average cost for epoxy coating is $400-$600, but that doesn’t include labor or materials. The average cost of labor alone is around $300, so you should expect to spend at least $700-$800 minimum for this service.

Epoxy coating costs vary by region and availability; if you’re looking for a job done right without breaking your budget, give us a call today!

How much does it cost to coat a bathtub?

The average cost of epoxy coating a bathtub is between $60 and $300, depending on the size of your tub and the brand of epoxy you choose. To get an exact price for your job, take these factors into consideration:

• Size: The larger the area being coated, the more time it will take. This means that you’ll need to pay for labor instead of materials. Also, consider whether or not there are any special fixtures (showerhead) or edges (sinks) that will require masking tape or extra attention during application.
• Brand: Different brands offer different warranties on their products; some even include free touchups if they don’t hold up over time. If you want free touchups down the road but can’t afford them now, choose an epoxy with a better warranty so that repairs won’t be as costly in future years.

Is Bathtub Refinishing worth it?

Bathtub refinishing is a great way to save money on your bathroom remodel. However, there are some considerations to make before deciding whether or not it’s worth it in your case.

First, you need to consider the cost of the epoxy coating you’re going with and how much time it will take for them to complete the job.

The type of coating that costs more will also require more labor time from professionals and therefore increase its price tag.

Second, if you’re able to do some work yourself when doing a bathtub refinishing project then this could save some money as well.

You may be able to get away with only having someone professionally install one side of your tub so that way both sides look uniform when finished without having any noticeable seams where they met up during installation

Can you epoxy a bathtub?

It is possible to epoxy a bathtub, but it is not recommended. An epoxy bathtub will not last as long as a regular porcelain tub, and it will not be as strong. Epoxy is more expensive than porcelain too.

So if you’re trying to decide whether or not you’d like an epoxy bathtub, think about how often you’ll use the tub, what kind of use it’s getting (i.e., kids splashing around in there), and whether or not your budget can stand for the extra expense of this material over the more traditional materials used for baths and sinks.

Can I Reglaze my bathtub myself?

The answer is yes, but you’ll need to make sure that the epoxy is applied correctly. To do this, you’ll need a few things:

• A cleaning agent likes TSP or Trisodium Phosphate (TSP).
• Sandpaper to sand off any paint chips or stains that may be on your tub. It should also be at least 150-grit so it can smooth out any rough spots in your porcelain coating too. It’s better if you can find 220 or even 400-grit paper so you don’t have to work as hard when applying epoxy and it’s less likely for bubbles to form under the surface (which can happen if there are too many imperfections in the porcelain).
• A roller brush with a long handle so it won’t slip from your hand while rolling on coat after coat of epoxy until desired thickness is achieved. If possible, try getting one made specifically for working with epoxies instead of just painting over them because they tend not to squeeze out quite as much product onto each pass; this means less waste and less chance of running out halfway through application process!

What is the difference between reglazing and refinishing bathtub?

• Glazing is the process of applying a coat of paint or epoxy to the surface of your bathtub.
• Refinishing is the process of removing the existing coatings and applying a new one.
• Refinishing costs significantly more than glazing because it requires more labor and materials, which are more expensive than paint or epoxy.

How much does it cost to re enamel a bathtub?

The cost of epoxy bathtub refinishing ranges from $500 to $1,000. Depending on your tub’s size, location, and other factors, this can cost as little as $500 or up to more than $1,000.

Bathtub reglazing (which involves stripping off the old finish and re-applying a new coat) costs between $200 and $1,000. You may also need additional repairs such as spackling or sanding before applying the new finish.

If you want to refinish your bathtub but don’t want to spring for the full epoxy method—or if you’re looking for something less permanent—there are several other options:

• Bathtubs can be refinished by applying a high-quality enamel coating that looks like porcelain or glazed ceramic tile; this will cost between $400 and $700 per tub.*
• Bathtubs can also be re-glazed using porcelain or ceramic tiles that have been pre-glazed by professional glazers; this will cost between $300-$700 depending on what kind of materials are used.*

How much does it cost to re porcelain a bathtub?

The cost of re-porcelainizing a bathtub will depend on the size of the tub and the quality of porcelain you choose. For example, if you’re looking to re-porcelainize a large porcelain tub (60″ x 32″), it could cost anywhere from $1,500 to $3,000 per person.

However, if you’re doing it yourself and renting a wet saw for your project (which costs around $150-$200), that price would likely be even lower.

If you decide to hire someone else for this project, keep in mind that there will probably be additional labor fees involved—but overall these costs should be fairly minimal compared with what repiping would run!

Conclusion

The cost of epoxy coating your bathtub is dependent on the size of your bathtub and if it requires any additional prep work.

The average price for a single-piece tub is between $350 and $450 per sq ft, but you should expect to pay more than this if you need a professional to do the job or if there are multiple seams in your flooring.