There are many reasons why you might want to refinish your bathtub. Maybe the color has faded and needs an update, or maybe there’s a crack in the tile that needs to be repaired.
Whatever the reason, refinishing a bathtub is not as difficult as it may seem at first glance. The key is knowing which products and materials are safe for use on your tub and knowing how to use them properly so that you get the best results possible without damaging any of the surfaces involved (including your skin).
In this article, I’ll walk through all of these steps in detail so that you have everything you need to know about refinishing a bathtub with epoxy resin—from selecting which type of epoxy project is best for your particular situation (and why), through all of the materials required for each step along the way, down to what color paint works best when painting over epoxy finishes.
By following this process I believe anyone can successfully refinish their own bathtub or shower enclosure at home without having to shell out thousands of dollars they don’t have just to hire somebody else to do it!
How long does epoxy last on bathtub?
Epoxy has a long lifespan and will last for years of use. It is hard to predict exactly how long your epoxy will last because it depends on so many factors, including the quality of the material you used, and how well you maintain it if there was any damage to the surface (such as chips or scratches), etc.
Generally speaking, epoxy finishes are very durable and can withstand heavy wear and tear without wearing away or cracking. The only way it will come off is if the tub is damaged enough that water gets beneath and washes away some of the caulk holding it down.
Table of Contents
Can you epoxy a tub surround?
Yes, you can use epoxy to resurface a bathtub surround. Epoxy is perfect for resurfacing smooth surfaces like your tub, toilet, and even your kitchen countertops!
It’s best to use epoxy on flat, uniformly colored surfaces. This means it’s not ideal for resurfacing textured walls or other types of surfaces that might have chips or cracks in them.
Can I resurface my bathtub myself?
We don’t recommend that you attempt to resurface your bathtub by yourself. Bathtubs pose a lot of problems for DIYers, including figuring out how to remove the old finish and clean up any residue without damaging the tub.
Since you’re probably hoping for a professional-looking result, it would make sense for you to hire someone who knows what they are doing and has experience in this area.
Since there is no way of knowing if your tub will be damaged during the refinishing process without testing it first (a test that could cost thousands), we highly recommend hiring a professional when considering refinishing your bathtub with epoxy.
How long does it take to epoxy a tub?
The answer to this question depends on the type of epoxy you’re using, and how well it’s mixed. Different types of epoxies cure at different speeds, with some taking just a few hours or days and others taking weeks or months.
Once the curing process is complete, however, your bathtub will be ready for use.
It’s also important to note that you should never use an open flame near an epoxy coating until it has fully cured.
How do you apply epoxy to bathtub?
The first step of refinishing your bathtub with epoxy is to thoroughly clean the tub and make sure there are no cracks or chips on the surface. If you find any, you’ll want to repair them before applying epoxy.
- Sand down any rough spots on the surface of your tub with sandpaper, then wipe it down with a tack cloth or other cleaning solution.
- Fill any cracks with epoxy putty and let them dry completely before continuing with the next steps.
Is resurfacing a tub worth it?
You may want to consider resurfacing your tub if you have a fiberglass or acrylic bathtub. The process of resurfacing is much less intensive than replacing a porcelain bathtub, but it still requires some preparation and an investment of time and money.
The average cost of resurfacing a tub runs between $150-200 per linear foot, with most homeowners spending around $500-$600 for the entire job.
If you’re looking for more information on how much it costs to hire someone else to do this work for you, check out our guide on finding home improvement contractors!
Is epoxy paint good for bathrooms?
Epoxy paint is a great coating for bathrooms.
- Epoxy is waterproof and easy to clean. Since it’s not porous, you can easily clean off mildew and soap scum.
- Epoxy has a very high level of durability, so it will last longer than other paints in your bathroom.
- The epoxy coating process is easy because it only requires two coats instead of three or more like some other paints do, making this option much less labor-intensive than traditional painting methods that involve multiple coats on walls and ceilings alike!
Is epoxy safe for shower?
Epoxy is a great product to use in the bathroom. It’s a very durable product, and it can withstand most road conditions. In fact, epoxy is used on many highway systems throughout the country as a protective layer between asphalt and concrete.
This makes it an ideal choice for your bathroom because it will prevent any water damage from occurring while still maintaining an aesthetic appearance that matches your decorating style.
Additionally, applying epoxy to your tub is easy—it only takes about 30 minutes per coat! You just need some basic tools like a putty knife or other scraping tool for removing excess material from around the edges of your old tub before applying it again with new layers each time until everything looks smooth like glass without any visible imperfections remaining anywhere else except where you might choose them (for example: if there are some scratches from previous owners using metal utensils).
Conclusion
We hope this article has helped you to understand the process of refinishing a bathtub with epoxy. As you can see, it is not as difficult as it may seem at first glance! With proper planning and preparation, anyone can undertake this project successfully.