can you epoxy a bathtub?

When your bathtub starts to leak, can you fix it with epoxy? If this question has ever crossed your mind, read on How long does epoxy last in the bathtub?

Epoxy is a very durable material. Epoxy can last for years and years, as long as it is applied correctly and maintained properly.

When you apply epoxy to your bathtub, it will adhere to the tub surface and harden into a protective shell that protects the surface from scratches or chips. You should expect that if you maintain your tub correctly, this protective coating will last indefinitely.

How do you epoxy a tub?

Epoxy is a hard, clear coating that can be used to seal and protect a variety of surfaces. It’s available in both liquid and thick paste form and depending on the amount of time you have to work with it, you can choose the best option for your project.

If you’re looking for a quick way to completely epoxy your bathtub from top to bottom, then we recommend using an epoxy primer followed by epoxy paint.

This method works especially well if you want your bathtub restored at home without having to remove it from its base (if possible).

To start off this process correctly, make sure that all parts are clean before applying any type of finish over them; this just ensures that they will look nice when they’re all finished up!

Can you epoxy a porcelain bathtub?

Yes. You can epoxy a porcelain bathtub if you follow these steps:

  • Remove the drain stopper and overflow cover
  • Clean the surface with an abrasive cleaning pad to remove any dirt or grime on its surface
  • Use sandpaper or a chemical cleaner to remove any existing wax from the tub surface

Can you make a bathtub out of resin?

You can’t make a bathtub out of resin, but you can make a tub out of plastic, fiberglass, or wood.

Plastic is used often to make bathtubs because it’s durable and cheap. These are typically used in homes with one bathroom that doesn’t get much use and needs something that won’t break within months.

Fiberglass is another option for making bathtubs because it’s lightweight and easy to install. The downside is that the material isn’t very strong so they’re not ideal if you have kids or pets who are regular users of the bathroom.

Wooden tubs are another option for those who want something natural looking but still retain some durability and strength at home

Is bathtub resurfacing a good idea?

If you have an old bathtub, and you don’t want to replace it, but would like to make it look better, then resurfacing is a good idea. It will save your existing tub from decay and damage.

Bathtubs are made of porcelain or cast iron, both of which can chip or crack when they become old and damaged. Resurfacing makes your tub look brand new again while protecting it from further damage. If you want to keep the same style of tub that’s great too!

If however; you want new features in your bathroom such as a whirlpool or air jets for massaging purposes then resurfacing isn’t going to help you achieve this – because the old surface will still remain beneath the new layer of epoxy (or whatever type of coating is used).

Can I Reglaze my bathtub myself?

Yes, you can re-glaze your own bathtub. However, it is a very difficult and dangerous job that professionals should leave.

Professional products are also more expensive than what you’d find at your local hardware store or home improvement megastore.

If you’re looking for something easier, why not just replace the whole tub? You’ll save time and money in the long run by doing so!

How do you fix a peeling bathtub?

If you’re looking at a DIY bathtub refinishing project, your first step is to figure out what kind of paint job you have and what kind of surface preparation you need to do.

  • If there are only a few chips in the tub, you can use a plastic scraper or putty knife to remove them. This is also known as “touching up” your bathtub.
  • If there are more chips than that, then use a wire brush or sanding wheel on an electric drill (if it has one) so that all of the peeling paint is gone down to bare metal.

How do you make an old bathtub look new?

  • Clean and dry the tub. The first step in your renovation is to clean and dry the bathtub. Use a mild detergent to wash away any dirt or grime, then wipe it down with a clean rag to remove excess moisture. Make sure you keep the bathtub as dry as possible throughout the whole process—wet surfaces can make bonding difficult!
  • Remove all existing caulking and old grout. You’ll want to remove any existing caulk or grout from around your tub before you begin applying new materials, so take this opportunity now while everything is still accessible!
  • Apply primer to seal damaged areas of tile or enameled steel surfaces before applying epoxy coating overtop of them later on if needed (this depends on how much damage has been done).
  • Apply bonding adhesive overtop of any remaining patches of mortar between tiles that have already been removed by applying directly onto each side (again making sure not too wet), then press firmly into place so that no gaps are left open between pieces at all times during curing time periods necessary after an application has occurred–there should be no gaps left behind when finished with this process because water won’t properly bond well enough if there aren’t any gaps left open within our work area which could result in cracks forming where these things happen; therefore we must ensure that nothing remains uncovered anywhere else at all through careful inspection before proceeding further down our list once again making sure everything stays covered up until completion steps such


If your bathtub is not epoxy coated, the next best thing would be to paint it with high-quality acrylic latex paint. This will give you many years of durability and protection from leaks and stains.

If you have an older home with porcelain tile on the walls, then painting might also be a good option for those areas too since they are often prone to scratches from regular cleaning products like bleach or ammonia-based cleaners.

Photo of author

Martin Flood

Martin Flood has been working in the construction industry for over 20 years as a general contractor with expertise in remodeling projects that are large or small. He has furthered his career by specializing in epoxy resin flooring, providing excellent service to both commercial and residential clients. Martin’s experience enables him to offer professional advice on how to choose the right type of project based on your needs and budget.

Leave a Comment