can you use appliance epoxy on sinks?

You can use appliance epoxy on a lot of different things, including sinks, bathtubs, and even countertops. You might have some questions about whether or not it will stick though. I’m here to answer those questions for you!

Can you use epoxy spray paint on sinks?

  • No, you should use a brush.
  • You can use a roller.
  • You can use a sprayer.
  • You can use a paint brush.
  • Or you could just be like me and go with the sprayer option because I don’t have time to wait for drying times!

Can you use appliance epoxy in a bathtub?

There are several benefits to using adhesive epoxy in a bathtub. First, it will seal the surface and prevent water from seeping into the pores of your tub.

Second, it will make cleaning easier because you won’t have to scrub every little stain away with harsh chemicals or scratchy sponges.

Finally, if you’ve been looking for an excuse to get that beautiful antique tub that’s been collecting dust in your attic cleaned up and looking good again—this is it!

Epoxy resin adhesives work best when they’re used on dry surfaces so be sure to use a primer first if necessary (depending on what kind of surface you’re working with).

If you do use a primer on your antique porcelain or acrylic bathtub before applying epoxy resin adhesive.

Can you use rustoleum appliance epoxy on countertops?

You should be aware that Rustoleum appliance epoxy is not recommended for use on countertops. This is because countertops are typically porous, and the paint may not adhere properly to the surface.

If you do choose to use it, however, make sure that your countertop is smooth and even without any watermarks or imperfections before applying the epoxy.

If you have previously painted or sealed your countertop with another type of coating, this could also make using Rustoleum appliance epoxy problematic.

Make sure that your existing coating has been completely cured before applying the new one (you can look for an expiration date on the label).

Can you use appliance epoxy on countertops?

Appliance epoxy is not recommended for countertops. It can be used, but it’s not the best option.

  • It’s easy to scratch the surface when washing dishes or using utensils, which means it won’t hold up well in those areas.
  • Food stains are more likely to penetrate through the finish and stain your table surface below.
  • The epoxy might also peel off over time as you use it, meaning that you’ll have to redo your countertop every few years (and we all know how much fun that is).

Can I epoxy my sink?

If you’ve never sealed your sink, then yes! Epoxy is completely safe to use on any surface as long as it’s clean and dry. You can also use epoxy on sinks that have been previously painted, although the epoxy will be more prone to chipping off of those types of surfaces.

If your sink has been previously sealed or stained, then the answer is no—you might want to consider removing that sealer before applying epoxy paint so that the finish doesn’t lift when you apply your coatings.

Can you epoxy a porcelain sink?

You can do this, but I wouldn’t recommend it. Porcelain is a more fragile material than granite and marble, so epoxy won’t hold up to the same abuse as other materials.

Plus, porcelain sinks are more expensive to replace than most other materials you might use for your sink. If you decide to go ahead with this project anyway, here’s one way that worked for me:

  • Clean the surface thoroughly with soap and water followed by rubbing alcohol (isopropyl). This will remove any wax or grime that may be lingering on the surface of your sink—you want it clean!
  • Mix up some epoxy according to the instructions on its container or package—and follow those instructions carefully! Take note of whether you’re creating a quick-drying polymer resin or an ultraviolet curing resin because they each require different methods of application.* Apply a thin layer over whatever area needs repairing; try not to get too much epoxy on there or else it’ll drip down into places where it doesn’t belong.* Allow at least four hours for drying time before handling objects placed directly onto them again (like pot lids).

Can I use rustoleum appliance epoxy on my tub?

Yes, you can use Rustoleum appliance epoxy on your tub. When used as directed, this product will not damage most surfaces-including porcelain and enameled cast iron tubs.

However, it is always a good idea to test a small area before applying the product in an area where it is not visible.

If you are working with a fiberglass or plastic shower or bathtub surface then Rustoleum epoxy may not be for you as these surfaces tend to scratch easily and would show any imperfections that were present prior to applying the epoxy coating over them which means that they would not look their best when viewed through the finish applied by using their products unless repaired first before applying any type of coating; however if this is something that needs repairing then there are options available such as repairing scratches using rubbing compound but doing so requires skill (especially if there are deep cracks) which means one should take caution when attempting such repairs themselves because the improper technique could ruin their project completely if done incorrectly.

Can I use appliance epoxy on plastic?

Yes, you can use appliance epoxy on plastic. If you have the right kind of plastic, that is. In order for a project to be successful, it’s important to know what kind of plastic your appliance is made from.

Some plastics are more flexible than others, and as such can be worked with much more easily than others.

You should also consider whether or not there are any other materials present in the piece (like metal). This information will help you determine if appliance epoxy would be an appropriate choice for your project


When it comes to using epoxy spray paint on your sink, the best advice we can give is to first test out a small area before committing to the entire surface. You might be surprised at how easy it is!

Photo of author

Martin Flood

Martin Flood has been working in the construction industry for over 20 years as a general contractor with expertise in remodeling projects that are large or small. He has furthered his career by specializing in epoxy resin flooring, providing excellent service to both commercial and residential clients. Martin’s experience enables him to offer professional advice on how to choose the right type of project based on your needs and budget.

Leave a Comment