how to finish epoxy resin table?

Epoxy resin is a great way to finish a tabletop.

It can be used for many years and will not yellow or crack over time, which makes it an excellent choice to protect your table from the elements. Epoxy resin can be applied in one of two ways: sprayed or poured, depending on the desired look and weight of the tabletop.

If you want a more traditional look, then pouring is best; however, if you prefer a smoother finish with less texture then spraying will work well for you. The steps below will show how to both apply epoxy resin through spray application as well as by pouring it onto your tabletop yourself!

What do you seal an epoxy table with?

Once your epoxy table is finished, you’ll want to protect it. You can do this by sealing it with a spray sealer or a roller, but if you’re going for a more natural look, use a brush and some cloth instead.

For best results, apply multiple coats of the sealer. However many coats you decide on are up to you; remember that epoxy resin will absorb into porous materials like wood so don’t skimp on that last coat! If applying via spray can (don’t do this), make sure to clean any excess off immediately after application before it dries completely otherwise it might leave an unsightly white film behind.

See also  how to make a live edge epoxy resin table?

How do you seal an epoxy table top?

You don’t have to worry about sealing your epoxy tabletop. Epoxy resin is already waterproof, and it’s hard to make it look any better. But if you want a glossy finish or a smooth surface, you can use polyurethane or polyester sealants.

You’ll find these sealants in the paint section of most hardware stores. Be sure that whatever product you choose has instructions for application on wood surfaces like tables.

Apply the sealant using a foam roller or brush and let dry completely before applying another coat of polyurethane/polyester polish to give your table an extra-shiny finish.

What finish can go over epoxy resin?

If you’re looking for the best finish for your epoxy resin table, you should know that there are several options.

  • Polyurethane: A type of varnish that’s often used over wood to protect it from moisture and wear. It offers a high-gloss look but can be difficult to apply and touch up if necessary. It’s also not ideal for use with food surfaces (where epoxy resin is often used).
  • Polycrylic: Like polyurethane, this type of varnish does not have good resistance against water or oil stains, making it less than ideal for use with a dining table or other surface where spills may occur frequently—especially if the spills aren’t cleaned right away!
  • Lacquer: Lacquer offers more protection than polyurethane but has similar disadvantages when it comes to being resistant to stains and spills while having low shine levels as well

How do you get gloss finish on epoxy?

If you want to get a glossy finish on your epoxy resin, the first thing to do is let it cure. Once it’s cured, sanding will make a huge difference in the appearance of your final product.

See also  how much does it cost to make an epoxy resin table?

Then apply polyacrylic. If you don’t have polycrylic (or whatever kind of polyurethane you prefer), use Minwax Wipe-On Poly Finish instead!

How do I make my epoxy table top clear?

After you have sanded the top, you can apply a clear coat to make it smooth and shiny. The best way to do this is with a spray gun or brush. You will want to use thin coats rather than thick ones because they are easier to control and won’t cause bubbles or other imperfections in your tabletop.

When applying epoxy resin tabletops, it’s important to use products that are compatible with each other. For example, if you’re using an epoxy resin as your base coat then only use polyester resin as your clear coat because they’re compatible with each other and won’t cause any damage if they come into contact with each other.

How do you clear coat a table top?

If you’re looking for an epoxy resin table finish, then you’ve come to the right place. Epoxy resin is a clear coating and it can be used on any type of material. It will add a layer of gloss and protection without changing the color or texture of your table surface.

How do you apply this stuff? Well, first off we’re going to need some tools:

  • Safety goggles
  • Gloves (or two pairs if they’re small)
  • A respirator mask (optional)

You’ll also need some materials:

  • Polyurethane clear coat – This should be available at any hardware store or home improvement warehouse. You may want to purchase more than one bottle; in case you mess up or just want two coats applied instead of one! (Note: If applying varnish as well as oil finish coatings, only use Tung Oil).

Can you pour epoxy over cured epoxy?

You can use the same technique to apply another layer of epoxy over a cured epoxy layer. If you’re trying to make a thicker coat, it’s best to wait until the first layer is completely cured before adding another one.

See also  What tools do you need to make an epoxy table?

If you’re pouring over already-cured epoxy, however, be aware that your bond will be weaker than if you were pouring over fresh raw resin.

This means that you should sand down any areas where the two layers meet before applying more resin; this will give them something more substantial to adhere to and will reduce the chances of cracking later on.

Can you put clear coat on epoxy?

There are a number of ways to apply a clear coat to your epoxy resin table. You can use an epoxy resin spray and an airless paint sprayer, or you can use a brush and a paint roller.

It would help if you never used a sponge when applying polyacrylic or polyurethane clear coat, as it will leave unsightly bubbles on your surface.

Conclusion

Now that you have finished your epoxy resin table, it is time to apply the clear coat. This can be done with either a brush or a spray gun. If you prefer to use the brush method, make sure that the surface of your project is completely cured and warm (at least 60 degrees Fahrenheit).

Once it reaches this temperature, apply two coats of clear coat in thin layers.

If you want to use a spray gun instead of applying with a brush, then make sure that both sides of your project are completely cured before applying two coats as well. One important thing to keep in mind when using this technique though—does not get any overspray on surfaces near where people might sit or eat!

Photo of author

Martin Flood

Martin Flood has been working in the construction industry for over 20 years as a general contractor with expertise in remodeling projects that are large or small. He has furthered his career by specializing in epoxy resin flooring, providing excellent service to both commercial and residential clients. Martin’s experience enables him to offer professional advice on how to choose the right type of project based on your needs and budget.

Leave a Comment