Can I put Polycuramine over epoxy?

One common question that we get is whether or not Polycuramine can be applied over epoxy.

The answer is yes – Polycuramine can be applied over epoxy without any problems! Epoxy is a very strong and durable material, so applying Polycuramine over it will only make your surface stronger and more resistant to wear and tear.

Can Polycuramine go over epoxy?

the answer is yes, you can put Polycuramine over epoxy. However, it is not recommended to do so.

The two products have different curing times and if they are applied over each other, the Epoxy will cure first and the Polycuramine will not adhere correctly.

If you must use them together, make sure to apply the Polycuramine very thin and wait for the Epoxy to cure completely before applying a topcoat.

What is better Polycuramine or epoxy?

Polycuramine has many benefits over epoxy. It is more flexible so it can better handle impacts and vibrations.

It also dries faster than epoxy so your project can be completed more quickly.

However, Polycuramine is not as durable as epoxy and may not be suitable for projects that require a high level of durability.

Is RockSolid better than EpoxyShield?

EpoxyShield and RockSolid are both great products, but they have different benefits.

EpoxyShield is a better choice for indoor applications, while RockSolid is better for outdoor applications.

Polycuramine can be used over either product to create a longer-lasting finish.

What can I put over an epoxy floor?

One option is to put a polyurethane coating over the epoxy. This will protect the floor and give it a shine.

Another option is to put down a coat of Polycuramine. This will also protect the floor and give it a shine, but it is more durable than polyurethane.

Polycuramine can also be used on concrete floors. If you are looking for a tough, durable finish for your floor, Polycuramine is a good option.

How do you get rid of Polycuramine?

Polycuramine is a water-based coating that can be applied to epoxy. It cures quickly and forms a tough, abrasion-resistant finish.

Polycuramine can also be used as a stand-alone coating, or it can be top-coated with epoxy for added protection.

When properly applied, Polycuramine will not chip or peel and will resist most common chemicals and solvents.

It is also resistant to ultraviolet light and weathering. Polycuramine can be cleaned with ordinary household cleaners.

How long does RockSolid last?

RockSolid can last for many years, but it is best to check with the manufacturer to see how long their product will last.

You can also put Polycuramine over epoxy to make it more durable.

How long does it take for Polycuramine to dry?

Polycuramine usually dries within a few hours. However, depending on the humidity and temperature levels in the room, it may take up to 12 hours for it to completely dry.

Make sure the area is well-ventilated and use a fan to help speed up the process if necessary.

Can you recoat RockSolid?

Yes, you can recoat RockSolid with Polycuramine. However, you must first remove the old coating with a solvent-based stripper.

Be sure to follow all safety precautions when using a stripper. Once the surface is clean and dry, apply the new coating using a roller or brush.

Let the new coating dry completely before putting furniture or other objects back on it.

What is polyaspartic coating?

Polyaspartic coating is a type of coating that can be used over epoxy. It is a two-part system, and it cures quickly.

It is also resistant to chemical spills and scratches. This makes it a good option for flooring.

Polyaspartic coatings are also available in a variety of colors, so you can choose the best one for your needs.

If you are looking for a durable and attractive floor coating, polyaspartic coatings are a good option.

You can put them over epoxy, so they will be protected from damage. They are also easy to apply, so you can get the job done quickly.

Is Polycuramine safe?

Epoxy is a safe and popular choice for coating surfaces. However, Polycuramine is a newer product that some people may be wondering if it is safe to use over epoxy.

The answer is yes, Polycuramine can be used over epoxy without any problems.

Polycuramine offers many benefits over epoxy, so using it as a top coat will give you the best results.

How do you use RockSolid epoxy?

RockSolid epoxy can be applied with a brush or roller. It is recommended that you wear gloves and safety glasses while working with the product.

The epoxy will start to harden within minutes, so make sure you are ready to work with it when you start mixing.

You have about 30 minutes of pot life once the two parts are mixed together. After the epoxy has cured, it can be sanded and painted.

Does RockSolid need a top coat?

RockSolid does not need a top coat, but you can put Polycuramine over epoxy for extra protection. Make sure to follow the instructions on the Polycuramine bottle for the best results.

RockSolid is a great product because it is so easy to use. You just need to mix it with water and then apply it to your surface.

It dries quickly and forms a hard, durable coating that will protect your surface from damage.