Mapei Ultracolor Plus is not an epoxy grout. It is a special type of silicate grout that can be used to fill joints, cracks, and crevices in porcelain tile.
You may need to mix in some water to get the grout to proper consistency
In order to ensure that your grout is mixed properly, you might need to add more water. It’s easy for the grout to become too thick or too thin.
If it’s too thick, you won’t be able to spread it easily and it could make the job more difficult than necessary. If it’s too thin, then the job will take longer and you’ll end up with a messier result than if it were just right.
You may want to consider using less water so that you can get all of this done quickly without any problems at all!
Table of Contents
- You may need to mix in some water to get the grout to proper consistency
- It’s a polymer-modified cementitious grout
- It’s stain-resistant, and it’s easy-to-clean and non-sag
- It comes in a wide variety of colors
- It can be used for interior or exterior, walls or floors
- It has a long working time and short set time
- It can be used on tiles that are 3/8-in thick or more
- Mapei recommends using it with their Ultracolor Plus “S1” as a sealer for best results.
- The Mapei Ultracolor Plus isn’t an epoxy grout but it does have its own benefits.
It’s a polymer-modified cementitious grout
Mapei Ultracolor Plus is a polymer-modified cementitious grout. It’s a hybrid of cement and polymer, which makes it highly durable and stain-resistant. Unlike epoxies, this type of grout will not discolor over time.
As you can see, Mapei Ultracolor Plus is not an epoxy grout—it’s a polymer-modified cementitious grout!
It’s stain-resistant, and it’s easy-to-clean and non-sag
Mapei Ultracolor Plus is a stain-resistant, easy-to-clean, non-sag epoxy grout that is suitable for use in kitchens and bathrooms.
It has a high degree of resistance to chemicals and oils, which makes it ideal for areas with high traffic or where food preparation takes place. It also has exceptional durability, as well as abrasion and impact resistance.
It comes in many colors to suit your style.
It comes in a wide variety of colors
You can find Mapei Ultracolor Plus in a whole range of colors, so it’s easy to find the perfect color for your project.
It comes in 6 shades: classic white and light gray, but also lighter grays like pearl and soft plus light beige.
You’ll also have access to deeper shades like trellis brown, terracotta red and deep grayish blue.
And if you’re looking for something brighter or more unusual than that—a turquoise? A fuchsia? There are plenty of options for that too!
The great thing about using an epoxy-based grout is that it comes with such great color options; this means you can use it anywhere from kitchen backsplashes to bathrooms without worrying about finding a shade that matches your tiles exactly (unless you’re really picky).
It can be used for interior or exterior, walls or floors
Mapei Ultracolor Plus grout is a great option for any indoor or outdoor project. It can be used as an interior or exterior, wall or floor tile grout.
The product is stain resistant and easy to clean which makes it ideal for use in public places like restaurants, hotels, schools, and offices.
The Mapei Ultracolor Plus has a long working time with a short set time making it convenient to apply during installation process.
The Mapei Ultracolor Plus features polymer modified cementitious formula that allows the colorant in the mix to mix completely with water before curing begins.
This creates very high-quality colored tiles and stones that look great even after years of exposure to harsh conditions.
It has a long working time and short set time
The working time is longer than traditional grout, which means you have more time to mix it up and apply it.
The set time is shorter than traditional grout, so once you’re done applying it, you don’t need to wait very long before you can use your floor again.
The cure time is longer than traditional grout, but we think this makes sense for a product that has such great color retention and durability.
Finally, cleaning ultra color plus isn’t as easy as other products because its surface properties make it harder to wipe away dirt or stains.
It can be used on tiles that are 3/8-in thick or more
You can use Mapei Ultracolor Plus on tiles that are 3/8-in thick or more. If you’re using 1/2-in thick tiles, you’ll need to apply the grout with a notched trowel and then sand it smooth after it dries.
For thicker tile surfaces (3/4-in), apply the grout with a bull float, which is more effective at removing excess moisture than your hands.
Mapei recommends using it with their Ultracolor Plus “S1” as a sealer for best results.
Mapei Ultracolor Plus “S1” is a polymer-modified cementitious grout, which Mapei recommends using as a sealer for best results. It’s stain-resistant, easy to clean, and non-sag.
Another great thing about this product is that it can be used in both commercial and residential applications. If you have any questions about your project or how to use it, reach out!
The Mapei Ultracolor Plus isn’t an epoxy grout but it does have its own benefits.
Ultracolor Plus is a polymer-modified cementitious grout that comes in a wide variety of colors. It’s stain-resistant, easy to clean, and non-sag.
The color will not fade and it can be used on both interior and exterior applications such as walls or floors.
Ultracolor Plus is not an epoxy grout, but it does have its own benefits!
Conclusion
Mapei ultra color plus is not a type of epoxy grout. The best way to use this product is by mixing it with mortar and applying it to your flooring before you lay the tile.
It will help protect your surface from stains and cracks as well as provide an extra layer of protection against moisture penetration.
