How do you resurface a concrete garage floor?

A concrete garage floor is a useful addition to your home. It can stand up to water and weather damage, it’s easy to clean, and it’s durable.

But after years of use, you may find that your concrete garage floor is looking a bit tired. If you’re ready for an upgrade without the mess and expense of replacing it altogether, consider resurfacing it instead!

This article will go over how to resurface a concrete garage floor so that you can bring new life back into your space.

What is the easiest way to resurface a concrete floor?

For a simple, no-nonsense look, you can’t go wrong with concrete. Concrete is also popular because it’s durable and easy to clean – if your garage floor is stained or cracked, don’t replace it. Instead, consider resurfacing the floor to make it look new again.

So how do you resurface a concrete garage floor? The first step is to prepare the surface by cleaning and etching (etching helps the new surface adhere to the concrete). Once that’s done, apply an epoxy coating over the existing slab. This will provide a strong protective barrier for your cement floor and help keep oil stains from coming through.

Finally, add decorative chips or flakes on top of your finished project to give some personality while staying within budget!

Is it worth it to epoxy garage floor?

It only makes sense that the best epoxy flooring is the one that offers the best protection. If you’re going to invest money in your garage floor coating, you want to make sure it lasts for a long time and withstands whatever life throws at it.

Think of all of the things your garage floor sees on a daily basis. Things like harsh chemicals, heavyweight, oil and grease stains, and of course: hot summer days and cold winter nights. You want an epoxy coating that will protect your garage floors from these things – not one that cracks or flakes after a few seasons!

Choosing an epoxy flooring system is an important decision as they are very long-lasting and durable products. Epoxy floors are also easy to clean and maintain, so they will always look great no matter what gets spilled or dropped on them!

They are also safe & hygienic which means there’s no need for visitors to worry about slipping or catching anything nasty from your garage floors when coming into contact with them either!

Can you resurface existing concrete?

You can resurface existing concrete by taking the following steps:

  • Remove any existing coating on the floor using a jackhammer and then repair cracks and holes.
  • Clean the surface of the concrete with a power washer.
  • Apply a concrete resurfacer to the surface. This is a water-based product that is painted onto the surface in two coats.
  • Seal and paint once everything else has dried.

Can you pour concrete over concrete garage floor?

Pouring concrete over an existing slab is possible but it’s not recommended. The problem is that the soil under the slab will settle over time and this can cause cracks in the concrete.

If you want to pour a new garage floor, you should remove the old concrete first and then prepare the base for a new one. This way you’ll have a more durable surface that will last for many years without any problems.

How can I cover my concrete floor cheap?

If you have a concrete floor in your garage or any other type of surface that could use some help hiding its structural look, there are several options for you to consider. From paint to carpet tiles and everything in between, there are plenty of ways to make your floor as decorative as your whim. Let’s take a look at several options you may want to explore.

First things first, if the concrete was the material of your choice before, it’s probably not going to change now. It will resist most types of stains and sealers, but with proper maintenance, it should be fine for years to come.

One option is epoxy paint—it sticks well and doesn’t leave behind any residue that could cause problems later on. One precaution: remember that epoxy paint can cause issues with traction (required when driving over the area) so be sure to check the conditions surrounding your garage before applying it.

For those who don’t want a permanent solution and prefer something more temporary but still stylish, there are concrete stain products available that will cover up the concrete or rubber flooring without leaving a residue behind. Carpet tiles will work well for covering an area as large as an entire garage; however, they do not offer as much coverage as vinyl or laminate does thanks to their open weave pattern (which would allow dirt through). As mentioned before though, the carpet needn’t be used on every bit of flooring—it would be better suited for damp areas like wet patches on wood floors where it won’t get worn off so quickly while cleaning up spills easier than traditional rugs or throw blankets would.

The same goes with outdoor rugs—they’re great at covering dirt effectively but thin and flimsy enough that they wouldn’t last long in areas subject to regular use/abuse by animals (dogs included).

Wood trim is also a great option if you have hardwood floors installed; however, both its beauty and durability vary depending on what kind of wood was chosen.

How thick should concrete resurfacer be?

Quality concrete resurfacing products like the epoxy flooring kits from RockSolid, along with good instructions, make the job a lot easier. But it’s still a big job.

Thickness is another key to success. The resurfacer should not be applied thicker than 1/8 inch in any one pass and should be applied in two layers for best results.

How much does it cost to epoxy a 2 car garage?

Epoxy flooring costs anywhere from $3 to $12 per square foot, including labor costs. This price largely depends on the size of your floor and the material costs. However, most epoxy kits will cost around $100-$150 per 250 square feet.

Why you should not epoxy your garage floor?

You should not epoxy your garage floor if you are not willing to put in the time and money for the maintenance and upkeep. Epoxy is a short-term solution, and it can be very expensive to have it reapplied, especially compared to other options for garage floor renovation. Additionally, there are many drawbacks when choosing to use epoxy. Some of these include:

  • It can be very slippery when wet
  • It cracks easily
  • It can be difficult to clean once applied


To summarize, you should:

  • Clean the concrete using a pressure washer or a broom and dustpan
  • Apply a thin coat of bonding primer with a paintbrush or roller
  • Roll on a layer of epoxy flooring with a short-nap paint roller
  • Roll on another layer of epoxy flooring, this time with a long nap roller
  • Add decorative flake to the second layer of epoxy when the paint is still wet
  • Allow the entire thing to dry overnight
Photo of author

Martin Flood

Martin Flood has been working in the construction industry for over 20 years as a general contractor with expertise in remodeling projects that are large or small. He has furthered his career by specializing in epoxy resin flooring, providing excellent service to both commercial and residential clients. Martin’s experience enables him to offer professional advice on how to choose the right type of project based on your needs and budget.

Leave a Comment