can rustoleum epoxyshield be used on wood?

If you’re looking to protect wood in your garage or workshop, you may have heard that epoxy is the best option. Epoxy is a clear coating used to paint and seal surfaces like wood, metal, and concrete.

It’s easy to apply and offers great durability for any item that sees heavy use or gets exposed to harsh chemicals.

However, before applying epoxy over existing wood surfaces (like your garage floor), make sure it’s compatible with your project!

Can rustoleum epoxy be used on wood?

The short answer: yes, but it depends on the wood.

It’s important to know that not all woods are created equal when it comes to using epoxy as a top coat. The type and condition of your specific wood will determine if you can use Rustoleum epoxy without any problems or with some minor preparation.

For example, untreated red oak is probably not a good candidate for this finish because it’s very porous, which means it can absorb the epoxy too easily making your project look blotchy and uneven.

On the other hand, treated pine or cedar might work just fine with a nice smooth finish!

Can epoxy coating be used on wood?

Epoxy coating is a good option for wood. The epoxy resin and hardener are mixed together to form a clear, gap-filling coating that can be applied to many surfaces.

This type of coating creates a very durable finish that will protect your wooden floor from scratches and water damage.

Epoxy coating is also ideal for your wood kitchen cabinets, countertops, or walls because it creates a high gloss finish that will make your cabinets look new again without having to replace them entirely (which can be expensive).

It’s easy to apply yourself with minimal preparation required – just mix the two components together and apply using brushes or rollers!

Can you use garage epoxy on wood?

Yes, you can use epoxy floor coating on a wood floor. Epoxy coating is a great choice for wood floors because it’s easy to apply and maintain. You just need to follow these steps:

  • Clean your floor thoroughly using an appropriate cleaner (we recommend an acid-based cleaner) and let it dry completely before applying the epoxy coating.
  • Sand any imperfections in your floor with an orbital sander, then clean again once done sanding so that there are no particles left on your flooring surface for them to scratch off later during installation of the new finish product; lightly scuffing or sweeping up any dust will suffice here too!

Can you use garage floor paint on wood?

No, it’s not a good idea to use garage floor paint on wood. The reason for this is that the coating will not adhere to the wood, causing it to peel off within a few days or weeks.

It’s also important to note that these coatings are designed for concrete floors and should not be used on any other type of surface without further testing.

Yes, some people have reported success using this type of product over plywood but we don’t recommend it because most of these products are designed for concrete and cement surfaces only

How do you apply epoxy to wood?

To apply epoxy to wood, clean the wood first. Then apply the epoxy with a brush or roller. Let it dry for at least 24 hours before sanding and sealing with another coat of Epoxyshield.

  • Use a good quality brush or roller to apply the epoxy—don’t skimp on this step! It will save you money in the end by keeping your project looking good longer.
  • Once your first coat has dried completely (at least 24 hours), sand down any lumps or bumps with 400-grit sandpaper, then seal again with more Epoxyshield before applying another coat of paint if desired

Can I put epoxy on plywood?

You can definitely use epoxy to seal plywood. Epoxy is a great way to protect your plywood from water and moisture, and it will make the surface more durable.

It’s important to know that there are two different kinds of epoxies: one type is meant for metal, while the other is made specifically for woodworking applications.

When choosing an epoxy product—whether it be resin or hardener—you’ll want to make sure that it’s compatible with both materials (metal and wood).

Do you need to seal wood before epoxy?

Yes, you’ll need to seal wood before epoxy. Epoxyshield is designed to be used on bare wood and will not adhere properly if the surface isn’t sealed first.

When sealing a piece of wood, you should use a high-quality penetrating oil-based varnish or an acrylic-latex mixture like Behr Marquee All Surface Satin Waterborne Acrylic Interior Latex Stain & Sealer (it’s what we use!).

When applying these products, make sure that they fully penetrate into the pores of the wood; this helps ensure maximum adhesion once your epoxy has been applied.

Some people also recommend sanding surfaces down with 220 grit sandpaper prior to applying their sealer—this may speed up drying times and improve final results as well—but it’s really not necessary unless you have a large amount of time on your hands!

Apply any barrier coatings allowed by the manufacturer in accordance with their instructions for best results. Then wait at least 24 hours after using them before applying any type of coating over them so that all moisture from these materials has had enough time to evaporate completely.”

Can you epoxy over old wood floor?

You might want to consider another product, such as Rust-Oleum EpoxyShield Heavy Duty Floor Coating. It’s recommended for use over new or existing concrete, plywood, and particleboard floors.

Epoxy is not recommended for use on previously painted or stained surfaces. It may peel off your flooring no matter how long it has been since you did these things to the wood.


The answer to all of these questions is definitely yes. You can use epoxy on wood, you can use it in your garage and even on plywood.

However, there are a few things that need to be done before applying any epoxy coating over an existing surface such as sealing the wood or cleaning everything off with soap and water so that there are no contaminants left behind which would prevent the epoxy from bonding properly

Photo of author

Martin Flood

Martin Flood has been working in the construction industry for over 20 years as a general contractor with expertise in remodeling projects that are large or small. He has furthered his career by specializing in epoxy resin flooring, providing excellent service to both commercial and residential clients. Martin’s experience enables him to offer professional advice on how to choose the right type of project based on your needs and budget.

Leave a Comment