what is an epoxy grout float?

Epoxy grout floats, also known as epoxy grouting floats or epoxy grout floatation devices, are used by construction workers to smooth out the surface of freshly mixed epoxy grout, which is often applied during tile-laying jobs.

As with many things in life, if you’re willing to work hard enough at something and have the right tools for the job, you’ll be able to pull it off!

What is an epoxy grout float, and what does it do?

An epoxy grout float is a tool used to apply grout. It’s shaped like a small broom and has rows of bristles that are just the right length and density to spread out the grout in an even layer, avoiding lumps or lines.

When you use an epoxy float, you’ll need some form of float holder so that your hand doesn’t get tired from holding onto it for long periods of time (this can happen because epoxy floats don’t weigh much).

The most common type of holder is called a “grout pad” or “grout brick,” and looks kind of like an oversized bathroom sponge.

All you need to do is put the pad on top of your container full of mixed grout, press down firmly with one hand while holding onto your float with the other hand, then pull back up without squeezing too hard so as not to disrupt any settled-in mixture before applying it evenly across all surfaces you’re working on at once!

Where to buy an epoxy grout float?

You can buy an epoxy grout float for about $15 at a hardware store or home improvement center. You can also find them online with a little bit of searching.

The most important thing is to make sure that you’re buying from a reputable source and getting one that’s made from good quality materials, as cheap options are likely to break down quickly or be difficult to use.

What are the different types of epoxy grout floats?

There are three main types of grout floats: wooden, plastic and metal. A wooden float is more expensive but lasts longer because the wood doesn’t get embedded with the grout and stain your hands.

A plastic float is cheaper than a wooden one since it can be molded to different shapes. Finally, a metal float is generally the most affordable option as it has no moving parts but will end up rusting after several months of use at home or in commercial settings like bathrooms and kitchens.

What materials are epoxy grout floats made from?

The most common materials for an epoxy grout float include plastic, rubber, nylon, and fiberglass. Epoxy grout floats with metal or copper handles are also available.

Other than these materials, there are many other materials that can be used to make epoxy grout floats as well.

These include stainless steel, wood, and synthetic ones made from polypropylene, polyethylene, or polyvinyl chloride (PVC). Some of the most popular kinds of plastic used in making these products include:

  • Polypropylene (PP)
  • Polyethylene (PE)
  • Polyvinyl chloride(PVC)

What are the pros and cons of each material?

When it comes to choosing the suitable material for your project, you’ll want to consider what your specific needs are.

For example, if you’re working on a large-scale commercial project or a high-traffic area like an airport, you may need something that’s durable and waterproof.

On the other hand, if your space is smaller and doesn’t get much foot traffic, then something more inexpensive might work just fine for you!

  • Epoxy grout floats are great because they offer long-lasting protection against water damage in both inside and outside spaces.*
  • Polyurethane floats have excellent traction on both tile surfaces (especially glass) but will wear down over time.*

What’s more important than how well either option performs? Your budget! If money isn’t an issue then go ahead and splurge on whichever type sounds best; otherwise stick with what works best within your budget so that everyone can be happy as possible in their home/business…

How long will an epoxy grout float last?

An epoxy grout float is designed to last a long time and can be used for many years. They are made from strong materials, so they will not break easily or wear out with use.

This is why it’s important to think about the type of epoxy grout that you’re using before you purchase anything else. If you are using regular concrete or mortar based materials, then it may be too soft for an epoxy grout float to work well on your project.

That being said, there are some other types of applications where these tools can be used as well (but they’re not designed specifically for this purpose).

One example would be when applying finishes over top of existing surfaces such as those found in bathrooms or kitchens where there might already exist some kind of finish applied previously like wallpaper or paint that needs additional sealing against moisture damage caused by condensation buildup inside walls due largely due atmospheric conditions outside such as humidity levels increasing during summer months especially here in Florida where temperatures reach upwards near 100 degrees Fahrenheit each year which causes dew points between 65% up until 80% depending upon location within state itself – depending upon whether someone lives close along coastline versus inland areas like closer towards mountains where inland areas tend cooler temps overall affecting comfort levels inside homes/apartments etcetera.”

When should you replace your epoxy grout float?

There are four good reasons to replace your epoxy grout float. These reasons are:

  • When the surface is no longer smooth.
  • When the surface is no longer flat.
  • When the surface is no longer level in relation to itself or other surfaces on your toolkit.
  • When you have an accident with it and break off part of its blade (or even just bend it).

How do you clean your epoxy grout float?

It’s important to clean your grout float before you put it away. You can do this by simply wiping it off with a damp cloth or using a degreaser if necessary.

After cleansing your grout float, please give it a quick drying with a dry cloth and then store in its case until the next time you need it!

It’s also important not to use power washers or pressure washers on your float since this can lead to damage of the rubber material used in construction. You should never soak your float in water either—it isn’t waterproof so exposing it like that will cause damage over time!

Do I need to use a sealer after installing an epoxy grout float?

You should always seal the floor after installing an epoxy grout float. This will ensure that the floor is protected and can withstand damage from everyday use.

Sealers are available at the same place you bought your float. Typically, they’re a two-part system: 1) a clear liquid; 2) a dry powder or liquid that needs to be mixed with water before applying to the floor.

An epoxy grout float is a great tool for applying and smoothing out epoxy grout.

An epoxy grout float is a great tool for applying and smoothing out epoxy grout. It helps to apply epoxy grout, and it also helps you smooth out the surface of the epoxy so that you get a nice level surface.

If you’re looking for a way to make sure your joints are all even, then an epoxy grout float is something that can help.


The epoxy grout float is a fantastic tool for any professional or regular DIYer looking to professionally seal their bathroom tiles.

This tool is great for creating a smooth, even finish that will stand the test of time and keep your bathroom looking like new for years to come.

Photo of author

Martin Flood

Martin Flood has been working in the construction industry for over 20 years as a general contractor with expertise in remodeling projects that are large or small. He has furthered his career by specializing in epoxy resin flooring, providing excellent service to both commercial and residential clients. Martin’s experience enables him to offer professional advice on how to choose the right type of project based on your needs and budget.

Leave a Comment