how to remove PVC from epoxy?

Epoxy resin is a strong adhesive that can provide a durable and waterproof coating. However, if you want to remove epoxy from your home or business, it can be difficult to do so without damaging the surface underneath.

There are several ways to remove epoxy from various surfaces and objects, but some of these methods will require two or more steps in order for them to work properly.

What solvent will dissolve epoxy?

Acetone is the solvent most commonly used in removing epoxy. It’s a strong solvent that can dissolve many types of epoxy, including those used on concrete floors and garage floors.

Acetone can be purchased at your local hardware store or online.

Acetone is known to be highly flammable and should be handled with care. Before you apply it to your floor, wear gloves and make sure that you’re in a well-ventilated area with no open flames nearby (like candles).

What dissolves hardened epoxy resin?

You can use acetone to dissolve epoxy resin. Acetone is a solvent that will dissolve the hardened epoxy resin.

Acetone is also a common solvent for other types of resins, so it may be available in your home already.

If you don’t have acetone at home, go to your local hardware store and ask them where they keep the industrial solvents or contact them.

Does vinegar dissolve epoxy?

Vinegar is a weak acid and will not remove the PVC. It will only dissolve the epoxy. So, if you have PVC in your epoxy, vinegar might be one of your options for removing it but it will take a long time to work.

Can you use acetone on epoxy resin?

Acetone is a solvent, which means that it can dissolve some things and not others. Acetone will not dissolve the paint or epoxy resin on your furniture; it will only remove other substances dissolved in the epoxy, like dirt, oil and wax.

Acetone is also used in nail polish remover, so if you’re concerned about what’s being put on your furniture (or if you just want to clean up after yourself), try using nail polish remover instead of acetone—it will have the same effect without the risk of damaging your project!

Does anything dissolve epoxy?

Some chemicals will dissolve the resin, but not the hardener. Acetone and alcohol are two common solvents that can be used to remove epoxy from your hands or other surfaces.

The hardener is a resin-and-hardener mix called epoxy, which means it’s basically a plastic material. So it would make sense that removing epoxy requires some kind of solvent for the plastic part of your mixture: acetone dissolves some plastics (like PVC), but not others (like polystyrene).

To remove excess glue from furniture and other objects made of wood or metal use turpentine, mineral spirits, or paint thinner instead of acetone because they’re less likely to damage these materials.

If you forget this step while working on something important like furniture then don’t panic! You can sometimes get away with just scraping off as much as possible before moving on with whatever project you have planned next unless there’s some sort of coating covering your work area like paint/varnish etc., otherwise, all will be well once we’ve gotten rid.

Does alcohol dissolve epoxy?

If you’re a DIYer, you probably have some denatured alcohol on hand in case of emergencies. It’s great for cleaning up spills and other messes without any harsh chemicals, so it might be just what you need to remove that pesky PVC from your epoxy floor.

You will want to use a rag rather than a brush when applying the alcohol because brushing it on will likely cause more damage than good.

Dip the rag into the bottle of denatured alcohol, then wring it out until it’s damp but not dripping with moisture (you don’t want it to run all over).

Rub this over the PVC-infested areas and let sit for 15 minutes; if they look clean after this time period, wipe away any remaining residue with another piece of cloth and allow time for drying before moving forward with any additional steps (like sealing or painting)

Does acetone melt resin?

Acetone is a solvent and can be used to remove PVC from epoxy. Acetone will not melt the epoxy, but it will dissolve the PVC in it.

The acetone will also help soften any remaining PVC residue if you wipe down your cleaned piece of furniture with a cloth soaked in the solvent before applying wax or another protective coating.

How do you use acetone to remove epoxy?

Acetone is a solvent for epoxy, which means it will dissolve the glue. It’s also flammable and should be used in a well-ventilated area.

When using acetone to remove PVC from epoxy, you must do so quickly because it evaporates as soon as it touches air. Acetone is toxic and can cause blindness if you breathe in enough of the fumes.

It’s important to wear gloves when working with acetone and keep your eyes protected from splashes of the chemical. The vapors are also highly flammable so don’t use this method with an open flame nearby!


With the help of this article, you can easily remove PVC from epoxy. The first step is to clean the surface of your work area using soap and water.

After that, you will need to sand off any remaining PVC resin with a sander or 120 grit sandpaper to make sure it’s smooth as glass before applying epoxy over it again.

Photo of author

Martin Flood

Martin Flood has been working in the construction industry for over 20 years as a general contractor with expertise in remodeling projects that are large or small. He has furthered his career by specializing in epoxy resin flooring, providing excellent service to both commercial and residential clients. Martin’s experience enables him to offer professional advice on how to choose the right type of project based on your needs and budget.

Leave a Comment