can you use epoxy resin on wood?

So you want to use epoxy resin on wood, but the question is: Will it stick? In this post, we’ll answer that question and many more. We’ll also share some tips for getting that perfect finish when working with epoxy resin on wood. So let’s dive in!

Does epoxy resin stick to wood?

Epoxy resin is a strong adhesive that bonds two pieces of wood together. It’s also used to seal cracks in wood, and to seal wood against water and moisture. So, yes! You can use epoxy resin on wood!

Epoxy resin works by creating a permanent bond between two items that would otherwise not be able to stick together.

In this case, you will need to apply an additional layer of varnish or polyurethane over the top of your existing finish so that it won’t chip off once you’ve attached it with epoxy resin.

How do you prepare wood for epoxy resin?

You can use epoxy resins on wood, but you have to make sure that it’s prepared correctly. First, you’ll need to remove all dirt and dust from the surface of your piece.

Then, remove any grease or oil that may be present. You can do this with paint thinner or mineral spirits (it will only take a few drops).

Once you’ve done that, sand the surface down lightly with 100-grit sandpaper until it feels rough—this helps bind the layers together better in later steps. Finally, apply a primer coat before applying multiple coats of sealer and finish as normal.

Will epoxy resin soak into wood?

While epoxy resin is not soluble in water, it can absorb into a porous object. This means that if you apply a coat of epoxy resin to wood, it will soak into the filler and then into the wood itself.

How do you get epoxy to stick to wood?

Epoxy resin can be tricky to use, but it’s not impossible. To get epoxy to stick properly, use a primer before applying your top coat of epoxy. A good primer will help ensure that the surface is clean and smooth, so the epoxy will adhere better.

You’ll also need to apply a bonding agent before you put on your top coat of epoxy. Bonding agents act as an adhesive between the wood and the resin, but they can also prevent air bubbles from forming in your project (air bubbles are one of the main causes of peeling).

Finally, sealants are important for preventing moisture damage over time (since wood is porous).

What kind of epoxy should I use on wood?

Epoxy resin is a resin and hardener in one. This means that it dries hard once you’ve mixed the two parts together, but it also has adhesive properties that allow you to glue things together.

Epoxy can be used for many things, including laminating, gluing, and filling holes in wood or other materials.

How do you use epoxy resin on wood for beginners?

  • Prepare the wood. Sand the wood, clean it with a damp cloth, and let it dry for several hours or overnight.
  • Mix the epoxy resin according to the package directions, usually with a ratio of 1:1 parts epoxy and hardener by weight.
  • Apply the resin to your piece of wood by thinning it out with 2-4 tablespoons of mineral spirits or paint thinner for every 2 cups of resin before mixing together in one container (this will make application easier). Be sure not to mix these solvents directly with your epoxy; if you are using two containers instead, remember which one has been thinned out so that you know where all your dilution took place!

Do you stain wood before epoxy?

Yes, you can use epoxy resin on wood. Epoxy is a type of plastic that will bond to most surfaces and create a very strong bond.

It’s used in many applications and industries, including construction and manufacturing. You’ll need to prepare your wood before you apply the epoxy though because even though it bonds well with different materials, it may not stick as well if the surface isn’t prepped properly.

The best way to use epoxy resin on wood for beginners is by following these steps:

How do you keep epoxy from bleeding on wood?

What you use to apply the epoxy will affect how long it takes to dry.

  • If you’re using a slow-curing epoxy, you can use a brush or roller to apply it. A thick coat of slow-drying epoxy is great for filling gaps in wood and adding strength, but it will also add weight to your finished piece.
  • If you’re using fast-drying epoxy, avoid applying too much at once—it’ll just create drips that can’t be removed without ruining the finish of your project. Instead, spread out small amounts on cardboard before applying them to your project.


In conclusion, epoxy resin is a great adhesive for wood that can be used in many different ways. The key is to make sure you know what kind of wood you are using and take the proper precautions before applying any pressure or force.

Photo of author

Martin Flood

Martin Flood has been working in the construction industry for over 20 years as a general contractor with expertise in remodeling projects that are large or small. He has furthered his career by specializing in epoxy resin flooring, providing excellent service to both commercial and residential clients. Martin’s experience enables him to offer professional advice on how to choose the right type of project based on your needs and budget.

Leave a Comment