What surfaces will resin stick to?

Resin is a type of plastic that can be quite versatile. Most resins are made from petroleum or natural gas, though some are made from plants. A wide variety of objects can be made using resin, such as jewelry, artwork, and sculptures.

What will resin stick to?

You can make resin stick to most surfaces, but there are some exceptions. These include not sticking to silicone, film, and other low surface energy materials. Resin will stick to wood, plastic, and glass.

When working with resin, it’s important to always work in a well-ventilated area with a respirator on. You need to pour the resin onto your piece or mold, let it cure for at least 24 hours then remove the tape afterward.

For those of us who like crafting things like jewelry and artwork using different mediums such as clay or glass (or even just making some decorations), we’re familiar with the process of coating our creations before they go into their final form — whether that means using acrylic paint as an adhesive first layer before putting on more coats later on top of it all together once everything has dried completely so nothing gets smudged up when moving around between stages while we’re working through each step until finished being ready for display!

What surfaces can you use resin on?

Resin will stick to almost any surface, and there are a few common household materials you can use that work great!

  • Parchment paper
  • Wax paper
  • Paper
  • Wood (with the right finish!)
  • Glass
  • Metal (again, with the right finish!)

When it comes to plastics and silicone, however, things get a little tricky. Resin doesn’t usually stick very well at all. You have to be sure that you’re using a plastic or silicone mold that has been designed for resin casting specifically. Otherwise, your resin piece will stick and never come out!

What surface does not stick to resin?

A few things to avoid:

  • PVC: A lot of people think that PVC would work as a mold, but it’s not flexible enough.
  • PTFE/Teflon: Resin will not stick to Teflon, but the epoxy can melt it.
  • Polyethylene: While polyethylene is a great material for casting resin, resin won’t stick to it when you are using it in its natural state (like plastic wrap).
  • Silicone: While silicone molds are fantastic for resin casting and many kinds of epoxy resins can be used with them, epoxy does not stick to silicone.
  • Dirt and dust: Make sure your surface is clean of dust or dirt because dirt and dust prevent adhesion from happening. You should also know that different kinds of wood have different levels of moisture inside them. If your wood has a high moisture content, the water will make an airtight seal with your mold preventing any curing from happening. This may seem like common sense but when we were first learning about resins we ignored all this information until our project failed completely!

What doesn epoxy stick to?

Not every surface is created equal. This is why you don’t want to rush into a project, because if you make a mistake with the preparation of your surfaces, then it’s all for naught. What’s more, there are some materials that are incompatible with epoxy and resin products.

What doesn’t Epoxy stick to?

Epoxy doesn’t stick well to most plastics, so if you’re coating an object made of plastic or ceramic (like a mug), rough up the surface first with sandpaper to help the epoxy stick better. If you use Epoxy Resin on plastic or ceramic items, then it will become permanently bonded (aka not removable). Some other non-stick surfaces include:

  • wax paper
  • polyethylene bags & containers
  • polypropylene bags & containers

Does resin stick to foil?

Will resin stick to foil?

Yes! Foil is a great surface for creating fun effects with resin. If you want to make your project look like something else, paper or foil are great materials for that.

How do you keep resin from sticking to mold?

  • Use soapy water.
  • Apply for mold release.
  • Wax it up.
  • Try the tape method.
  • Spray lacquer is another option.
  • Note that resin doesn’t stick to silicone (sometimes)

What materials can you put in resin?

Resin is a flexible material that can take many different forms. It can be used to make jewelry, sculptures, and many other ornamental objects. Because resin is itself a versatile substance, it can also be used with many different kinds of materials: for example, you can use resin on top of wood or metal to add strength and durability to those materials. However, there are some materials that resin does not stick well to—or that would damage objects made from resin if they were put together with them.


So, what surfaces will resin stick to? Resin can be used on a huge variety of surfaces. Just don’t use it on anything that doesn’t fall into one of the following categories: wood, metal, glass, plastic, ceramic, and some fabrics.

Leave a Comment