how to remove floor epoxy?

Ever since epoxy flooring became popular, people have been wondering how to remove it. There are tons of different reasons why someone would want to remove epoxy from their floors: the floor may be damaged and need repair, they might need to remodel the room in which their floor is installed, or replace the old tile with something new.

But whatever your reason for wanting to remove epoxy, you can rest assured that it will not be as difficult as you originally thought!

Can you soften hardened epoxy?

If you’re dealing with hardened epoxy, you can soften it by using a heat gun or a lamp. The heat should be applied to the epoxy for 10-15 minutes at a time, but don’t leave either method on longer than necessary or risk damaging your flooring beneath.

Also, if you have access to an electric hair dryer that has been used by another person—one whose hygiene habits may not be up to yours—you can use that as well! It might also help if you have access to an electric hand blender (or other kitchen appliance), though this isn’t as advisable because of potential damage to your flooring.

What is the easiest way to remove epoxy?

How do you get rid of epoxy? Epoxy is a very common type of floor finish, and it’s also one of the most difficult types of flooring to remove.

The best way to remove epoxy is with a chemical solvent and water mixture, but this can be extremely dangerous if not done correctly.

A safer method is to use a scraper or heat gun, but these methods take more time and effort than other options.

There are many different types of epoxy finishes available on the market today—some are created specifically for sealing plywood floors while others are designed for concrete surfaces only.

Since each type has its own unique characteristics when it comes time for removal methods like heat guns or chemical solvents may not work well enough in removing them safely without causing damage!

What will dissolve epoxy?

You’ll find that acetone will dissolve epoxy. Acetone softens it, dissolves the resin, and so on. If you were to use acetone to remove epoxy flooring or tile, you’d want to be careful not to leave any residue behind; if there’s any left it could cause discoloration as it dries out over time.

Acetone also works for other types of glue and adhesives like super glue or wood glue too!

How do you get dried epoxy resin off the floor?

There are a few ways to remove epoxy resin from your floor. The first is to scrape it off with a razor blade. If you don’t have a razor blade, you can use a putty knife or even a butter knife.

Be careful not to gouge the floor while scraping the epoxy off, though!

If you’re still left with some resin on the floor, try some acetone or nail polish remover to dissolve away what remains of that dried epoxy.

If neither of those things works for whatever reason (like if there’s too much residue), then consider using some chemical stripper designed for removing dried paint and varnish from floors.

Can you tile over epoxy floor?

Yes, you can tile over epoxy flooring. However, you’ll need to take a few things into consideration.

  • Tile adhesive and grout are not suitable for use with epoxy flooring. The adhesive will not bond properly and the grout may flake off over time due to poor adhesion of the tiles.
  • You should also keep in mind that most tiles have a weight limit of 80 kgs per square meter. This means that if your floor is installed on top of plywood, or another substrate that has any kind of moisture in it (such as wood), then it might be necessary to install some sort of reinforcing structure underneath before laying down your tile sheets so they don’t crack or buckle under their own weight when installed directly onto the plywood itself without any extra reinforcement underneath them first!

Why does epoxy floor peel?

When it comes to flooring, there are a few things you should know before you start your project. The most important thing is that if you want your epoxy flooring to last longer than a few years, then it’s important that you do the following:

  • Use the right tools for the job
  • Clean up any spills immediately
  • Don’t leave food on the floor
  • Keep the surface dry (and don’t forget about small puddles)

Does vinegar dissolve epoxy?

Vinegar is not a good option for removing epoxy. It will not remove the epoxy, soften it, or dissolve it in a reasonable amount of time. In fact, vinegar cannot dissolve hardened epoxy at all.

How do you soften epoxy?

If you’re looking for a quick way to soften epoxy, here are some of the most common ways to do this:

  • Heat gun. A heat gun can be used to melt certain types of epoxy and other materials, but it’s important not to overdo it. If you use too much heat, you could damage your flooring or even burn yourself. You should also be careful around corners or edges as they will get hotter than flat surfaces and may start melting faster than in other areas.
  • Blowtorch (propane). This method is similar to using a heat gun except that instead of blasting out cold air at high speeds, your torch will generate intense heat from its flame source—which is usually gas fuel like propane or natural gas. Just like with a regular blowtorch (and most other torches), make sure you wear protective clothing when working with these materials—especially if you have long hair!


While epoxy is a very durable and long-lasting product, it can be removed from floors. It’s important to remember that the methods listed above will only work on softening hardened epoxy and won’t dissolve it completely.

If you still have questions about removing epoxy from your floor, contact a professional today!

Leave a Comment