how to remove epoxy from tile floor?

Epoxy is a substance that’s used to bond two things together. It usually comes in a liquid form and cures (dries) into a very strong bond between the items being bonded.

It has many uses, including for flooring and tile, because it has good scratch resistance, impact resistance and can be used at high temperatures without melting or deforming like other types of adhesive would do.

Epoxies are made from polymers (plastic materials) which have been chemically cross linked to each other at the molecular level. This results in them having properties such as being:

  • Very strong bonds; they resist breaking apart very well under pressure or force applied against them by anything external like foot traffic on your flooring surface;
  • Waterproof; epoxies will not absorb water so they don’t get damaged when there’s moisture around them like wood floors would when exposed directly under kitchen sinks where there tends to be standing water during heavy use periods like washing dishes;
  • Heat resistant up to fairly high temperatures depending on what type you buy; if you’re building something out of metal or concrete then using an epoxy might help prevent cracks from forming over time due to its ability not only to withstand but also protect itself against corrosion caused by exposure to moisture or chemicals.”

How do you remove dried epoxy from floor?

  • Use a putty knife or razor blade to scrape off any excess epoxy.
  • Allow the floor to dry for 24 hours if it’s wet, then wipe it with a clean cloth or towel until all residue has been removed from your tile flooring

How do I get resin off my tile floor?

If you’ve decided that your concrete flooring is best served with a more intricate design, then perhaps a tile floor will be a good fit.

This can be achieved by using an epoxy based adhesive (epoxy cement) to coat the surface of your tiles. However, if you’re not satisfied with this choice and wish to remove it completely, there are several methods that you can use:

  • Use heat guns or blow dryers to soften the epoxy before scraping it up with a putty knife or scraper. Repeat this process for all areas affected by the epoxy glue until all traces have been removed from your tile floors.
  • Use commercial epoxy removers if desired—but make sure it’s not harmful for use on concrete surfaces!

What dissolves dried epoxy?

Acetone, isopropyl alcohol, mineral spirits, and lacquer thinner should remove epoxy. Do not use bleach or ammonia on the tile surface because it will cause a chemical reaction that could damage your tile.

Also avoid using water to wash off the epoxy, as this can make it harder for solvents to penetrate into the dried bond coat.

How do you get hardened epoxy off?

You can remove cured epoxy from tile floors and countertops with a few simple tools. First, gather your supplies: a scraper and bucket of warm water, plus a solution of dish soap and vinegar (1/2 cup each).

Next step? Scrape up as much of the dried epoxy as possible with your scraper; then wash it away with the soapy vinegar solution.

If that doesn’t work, try rubbing alcohol instead—it’s great at breaking down hard-cured epoxy with little to no scrubbing required!

Can epoxy floor be removed?

You can remove the epoxy using a putty knife and scraping it off. You will want to scrape in the direction of the grain, so that you don’t damage your tile floor.

You should also be aware that muriatic acid can be used to get rid of epoxy. However, this method may be dangerous as it involves chemicals and could cause damage to your skin or eyes if not used properly.

If you’re looking for an alternative method of removing excess epoxy from your tile flooring, try using a power washer instead of muriatic acid or another chemical stripper! If you do decide on this option make sure that there are no electrical outlets near where you plan on working since water could short circuit them which would ruin them completely.”

Does vinegar remove epoxy?

Vinegar is a chemical solvent, which means that it can dissolve other chemicals. Epoxy is an example of such a chemical—it’s made up of two different materials that become soluble in the presence of vinegar.

Many people have tried using vinegar to remove epoxy from home surfaces like tile floors and woodwork without success; this isn’t because vinegar isn’t able to remove epoxy, but rather because those people didn’t use the right kind of vinegar! They used cooking or distilled white vinegar, which is not strong enough solvents for epoxies.

The best type of vinegar to use when trying to remove epoxy is apple cider vinegar (or any other brand).

What gets epoxy off tile?

You’ll need:

  • A bucket with warm water
  • An all-purpose cleaner, such as vinegar or ammonia (but not bleach)
  • A bristle brush or scrubbing pad (or an old toothbrush)


  • Scrub the epoxy off the tile using your chosen cleaning agent and a bristle brush. For best results, use warm water instead of cold so that it flows more easily into joints and crevices where epoxy has lodged itself. If you have an old toothbrush handy, this can be helpful for getting into tighter spaces. The key here is to remove as much epoxy as possible before applying any chemical strippers or solvents—you’ll want all those gunky bits gone before doing anything else because they can affect how well your stripper works!
  • Rinse away residue from your floor with clean water; let it dry completely before applying additional coats of sealer (if you’re looking to restore its shine).

Can epoxy be removed from tile?

Epoxy can be removed from tile floors with a few different tools. The best way to remove epoxy is using a flooring scraper tool, which you can purchase online or at your local home improvement store.

If you don’t have access to one of these, you can also sand down the epoxy if you do not want to use a scraper. If there are just small areas that need working on, then this may be the best option for you.

If neither of these options works out for you, then another option would be using a floor buffer machine that will remove the epoxy over time while being less harsh on your hands than sanding would be (although this method does take longer).

And lastly, if all else fails and there’s no other choice left but to scrape off large chunks yourself by hand…sanding might still work out better for larger surfaces such as floors were using another tool wouldn’t make sense because it would take too long!


Now that you know how to remove epoxy from the tile floor, you’re ready to get started. The best technique for your situation will depend on the type of epoxy and the condition of your tile floor.

If you’re having trouble removing epoxy with any method, don’t be afraid to try something else! You can combine techniques in order to make sure that it comes off without damaging your floor or leaving behind residue and stains.

Leave a Comment