how to put epoxy coating on garage floor?

Epoxy floor coating is a popular choice when it comes to garage flooring. It’s an easy-to-install, durable, and attractive option.

That said, the process of putting epoxy on your garage floor is not always straightforward. You must prepare the surface correctly before you can apply the epoxy or else it will crack or peel off over time.

This article will show you how to properly prep your garage so that you can get great results every time!

How do you apply epoxy to garage floor?

Preparing the floor is the most important step, but there are several things you can do to make sure your epoxy coating is successful. First, wash the floor with soap and water to remove any dirt or grease from it.

Next, mix the epoxy with a hardener in a separate container and stir thoroughly until the mixture becomes transparent.

Fill in any holes on your garage floor using either wood filler or caulk; these will prevent cracks from forming in your epoxy coating later on.

Once you’ve prepared the surface of your garage floor, it’s time to apply it! Using a paint roller, apply an even coat of epoxy over all areas of concrete (remove rugs first).

Let dry for 48 hours before removing tape and masking materials used during application process.

Can I epoxy my garage floor myself?

Yes, you can epoxy your garage floor yourself! In fact, it’s a very simple DIY project. You’ll need to buy the epoxy and the tools to apply it, but once that’s done, you’re good to go.

If you want more information about how to do this yourself, we’ve got plenty of resources available for free on our website.

How do you prepare a concrete floor for epoxy coating?

  • Clean the floor

To prepare your concrete floor for epoxy coating, you need to remove any grease, oil, and dirt from the surface of it.

You can use a concrete cleaner that contains no phosphates or other chemicals that would cause etching in your new epoxy coating.

The best way to do this is by power washing with water at high pressure on all surfaces including areas under equipment and machines.

If you don’t have access to a power washer then scrubbing with a stiff broom will be effective too but takes more time than power washing does and more effort on your part as well as potentially damaging tools stored nearby if they are not properly protected during cleaning process.

2 . Etch Your Concrete Floor

After cleaning with soap&water mixture (1/4 cup liquid dish soap per gallon hot water) wipe down entire floor again using ammonia-based etching solutions before applying an epoxy coating for better results when applying finish coatings later on after curing period has passed without damaging any existing sealers or waxes used previously over top smooth-sanded surfaces prior to application process starting off clean surface first thing off getting rid of dust particles left over after sanding process is done.

then rinsing thoroughly with fresh water until clear runoff comes running out bottom corners drains closest edges where they meet walls around perimeter where cracks accumulated grime build-up making them difficult reach later down line which could lead cause issues overall application process causing difficulty achieving desired result desired outcome.

How many coats of epoxy do you put on a garage floor?

The number of coats you’ll need for your garage floor depends on the type of epoxy you’re using, but a general rule is to apply one or two coats.

You’ll want to use a high-quality exterior grade epoxy, as it will last longer than some other types and provide better protection against the elements.

Also, be sure that the surface you’re coating is completely clean before applying the epoxy!

How much does it cost to epoxy a 2 car garage?

The cost of epoxy coating your garage will vary depending on the size of your garage, the number of materials needed and any special features you may want.

On average, a standard 2-car garage can usually be completed for around $300-$400. However, if you have an RV or boat parked in your garage you may have to pay extra for a thicker layer of material as well as more tiles to cover these larger surfaces.

There are also some additional factors that could affect pricing such as:

  • Size: The bigger the space that needs coating, typically means more material will be necessary. So a 3-car sized building would cost more than a single-car-sized building because there’s simply more area being covered with epoxy coating material;
  • Type/Size Of Garage Door: If there’re any doors or windows in between each other (like double doors), then it makes sense that those would need even more coverage than regular walls did so keep this in mind when calculating costs!

Is it worth putting epoxy on garage floor?

Epoxy coating is a popular garage flooring option because it’s so durable and offers your garage a nice professional look.

If you’re considering applying epoxy to your garage floor, here are some reasons why it might be the right choice for you:

  • Epoxy is more durable than paint, which can start to chip or peel off after just a few years of use.
  • Epoxy can offer better traction than other types of floors because the surface has less friction than concrete or tile. This means that you’ll have an easier time moving around in your space without slipping on wet weather days when oil may be collecting on top of surfaces like asphalt driveways outside doors leading into garages where oil may spill onto floors inside these buildings especially if they’re not well maintained (e.g., if no one mops up spills regularly).
  • The color selection options available with epoxies mean that there’s something out there for everyone—you don’t have to settle for boring white anymore!

What are the disadvantages of epoxy flooring?

Epoxy floors are not a good choice if you have high humidity, high foot traffic, high temperatures, or acid levels in the garage.

If you live in an area with a lot of rain and snow, the temperature in your garage will fluctuate rapidly. This can cause moisture to get into the concrete flooring and cause it to crack over time.

The more moisture there is in the air around your garage flooring material (like epoxy), the quicker it will degrade.

What is better than epoxy for garage floor?

Epoxy is the best garage floor coating you can get. It is the most durable, it’s the most affordable, and it’s also easy to apply. There is no other garage floor coating that can compare with this product.


Now you know how to apply an epoxy coating to your garage floor. As you can see, it’s not too difficult and the results are worth the effort.

Remember to wear gloves and protective clothing when applying epoxy and avoid breathing in the fumes from this chemical during application.

Leave a Comment