how to clean epoxy stone floors?

Epoxy is a type of hard coating that’s used to protect and seal surfaces from water damage. It’s a durable, non-porous material that can be applied to concrete floors for use as an industrial flooring option.

Epoxy stone floors are very durable, making them ideal for areas with heavy foot traffic such as warehouses and factories.

These floors also have low VOC emissions, which means they’re better for your indoor air quality than other types of flooring materials like vinyl or carpeting.

What is the best way to clean an epoxy floor?

The most important thing to do is keep your floor clean. Regularly sweep and vacuum the floor with a soft-bristled broom and dustpan. If you can, use a damp mop or cloth to wipe up spills right away.

Make sure that you don’t let dirt or grime build up on your epoxy stone floor as this will make it harder to clean later on. Use a dry mop regularly (1-2 times per week) to remove stains from everyday dirt, dust, and hair that accumulates in high traffic areas like hallways or entranceways where people come in from outside every day with their shoe on\footwear that has picked up dirt from walking around outside, etc.

It’s also good practice when mopping not just wetting enough but drenching these high traffic areas so they get really soaked through which will allow them to do an excellent job in picking up any loose particles of dirt/dust etc.

You can also use commercial cleaners available at hardware stores if needed while mopping these high traffic areas but I would recommend consulting first with the manufacturer before doing so because some types may void warranty coverage if used improperly\contaminated by other chemicals\etc.

I wouldn’t recommend using harsh abrasive cleaning products such as bleach cleaners because they can cause damage over time if used regularly – only use this type if absolutely necessary (ex: persistent stains).

How can I make my epoxy floor shiny again?

First, you’ll want to clean your epoxy floor with a non-abrasive cleaner. Use a soft brush, mop, or sponge to apply the cleanser and wipe it off with a clean cloth immediately after rinsing.

Then dry the floor with another clean cloth until it’s dry all the way through. Finally, apply a new topcoat or polish if desired; this will make your floor shiny again!

Can I use Swiffer on epoxy floors?

Yes, you can use Swiffer to clean your epoxy floors.

Swiffer is a great tool to use to clean up dust or hair. It’s also great for touch-ups in between professional cleanings. However, it’s not a replacement for professional cleanings that are done by hand!

What do you clean epoxy with?

Epoxy is a type of surface coating that can be used on floors, walls, and other surfaces. It’s commonly used as a protective layer for concrete, metal, and wood floors—but you may also find it in other places like countertops or cabinets.

Epoxy coating is created by mixing two chemical compounds together to form a liquid resin that hardens when cured at high temperatures (typically between 65°C – 80°C).

What Does an Epoxy Floor Look Like?

An epoxy floor is shiny and smooth with no visible grain pattern; it often has a glossy finish similar to ceramic tile or Formica countertops.

How do you refresh an epoxy floor?

There are a couple of ways to refresh your epoxy floor if you are using the correct cleaner. The first is with a microfiber mop, which uses little to no water and can be used when the floor is dry. This method will help remove dust particles, but will not remove stains or spots unless they are water-soluble.

If you have heavy stains on your flooring, it might be best to use this method followed by scrubbing with a brush and solvent-based cleaner and then applying heat-activated wax that was created specifically for epoxy floors (you can find these at most home improvement stores).

How do you fix a cloudy epoxy floor?

Knowing how to clean an epoxy floor is important, but the most important thing is knowing that it’s easy to maintain. Epoxy floors are durable, long-lasting options for your home and commercial spaces.

The key is to keep your epoxy looking new by cleaning it regularly. If you don’t take care of your flooring correctly, you could end up damaging its appearance and even cause damage to other areas of your home or business space.

This means taking a few moments each day or every few days (depending on how often you use the room) will keep any grime from settling into crevices where it can harden into unsightly stains over time.

Why does epoxy get cloudy?

Epoxy can be cleaned using vinegar and water. You can use a mixture of one part vinegar to three parts water for cleaning epoxy floors. Vinegar is acidic and will help dissolve the hard water stains that are often found on concrete or epoxy floors.

The best way to prevent cloudy epoxy is to clean it regularly with your mixture of vinegar and water, or with a commercial brand of floor cleaner.

If you find that your floor has become cloudy because of improper cleaning methods, then you may need to reseal the flooring material before applying another coat of resin topcoat.

Can you use Pine Sol on epoxy floors?

You can use Pine Sol on epoxy floors. To do so:

  • Mix a small amount of Pine-Sol in a bucket of warm water.
  • Use a mop or cloth to apply the solution to your floor and let it sit for 5 minutes to fully absorb into the floor.
  • Rinse with warm water and dry with a clean, dry cloth.


  • If your floor is shiny and you’re looking to make it even shinier, we recommend buffing it with a buffing machine or a commercial polishing pad.
  • If your floor is dull and you want to refresh it, apply polish in the direction of the grain of your concrete. Be sure to use plenty of elbow grease!
  • If there are cloudy spots on your epoxy garage floor, mix some vinegar with water and scrub them off using an old toothbrush (you can also use baking soda). Make sure that there isn’t any residue left behind by taking a damp sponge and wiping up any excess liquid from the surface of the floor.
  • Finally, if all else fails and none of these methods work for you… don’t lose hope! There are other ways that might help get rid of these pesky stains without having to hire someone else or spend money unnecessarily on products that may not fix anything at all because they weren’t made specifically for this type of surface material like ours was designed specifically so there wouldn’t be any problems like this happening again ever again when using our product line which includes several different variations including but not limited too: industrial-grade cleaners/degreasers (ideal choice) as well as various mold-resistant formulas available only through us directly through this website which sells both types simultaneously at retail prices below what most companies charge – guaranteed!

Leave a Comment