How do you keep epoxy floors shiny?

Epoxy is a combination of resin and hardener that is used to seal cracks and cover imperfections in concrete floors. Epoxy floors can be made with either colored chips or paints. They are used in garages, basements, warehouses, and even some types of businesses.

Epoxy floors are durable, but they do need maintenance to keep them looking good. The first step is to protect the floor with an epoxy sealer at the time of installation. This keeps the epoxy from becoming dull over time.

How can I make my epoxy floor shine?

Now that you have a clean floor, you can begin the process of buffing. A buffer is one of the easiest and most effective ways to polish an epoxy floor. It will allow you to cover a large area in a small amount of time and use minimal elbow grease.

To get started, apply 2 or 3 coats of polish to your floor using a soft applicator pad and allow each coat to dry thoroughly before applying the next coat. Once all coats are dry, it’s time for the buffer. Use a heavy-duty buffer at high speed with fine steel wool or white pad for best results.

Buffers are available for rent at most hardware stores so it’s not necessary to purchase one unless you plan on going into business as an epoxy buffing guru.

What Makes A epoxy shine?

Epoxy floors are becoming popular because they are both attractive and durable. epoxy flooring is a resin that is applied to a floor to create a hard, shiny surface. epoxy flooring is often applied to concrete floors to allow for easy cleanup of oil and other spills in garages and industrial settings.

The epoxy can be made in many shades, allowing the applicator to match it with the existing decor. Once applied, the epoxy requires little or no maintenance and can last for years if properly cared for.

It is important to keep this type of floor as clean as possible so that it will retain its shine and luster.

Can I wax an epoxy floor?

If you own a home with an epoxy floor, you can ensure that your floor will stay shiny and smooth by following the proper maintenance instructions. While there are many options for keeping an epoxy floor clean and shining, waxing is not one of them.

Epoxy is a substance that is used to coat and fill the small holes and cracks in the concrete floor. The epoxy is designed to create a smooth, glossy surface that is easy to clean.

Epoxy floors add value to your home and provide a durable covering for your garage or work area. It’s important to understand how to properly maintain this type of surface so that it lasts as long as possible.

How do you maintain an epoxy floor?

Regularly sweeping, dusting, and mopping your epoxy floor will keep it in great shape. You can use a broom and dustpan or an electronic broom for this job, but be sure to avoid brooms with stiff bristles.

After the preliminary sweeping, you should mop the floor with a microfiber mop and non-abrasive cleaner. Another option is to rent an automatic cleaning machine from your local hardware store.

If you’d like for your epoxy floor to have some extra shine, consider using a buffer or polisher on it once every few months.

Should you wax epoxy?

You may be wondering if you can wax your epoxy floor. The answer is no. Waxing over an epoxy floor will create a slippery surface that can cause falls and injuries. Plus, the wax makes your epoxy floors harder to clean, as it can leave behind a residue that attracts dirt and debris.

Another important thing to note is that you should never use any type of vinegar-based cleaning products on an epoxy floor, because vinegar will strip the sealant from the epoxy, leaving it dull and discolored.

How do you fix cloudy epoxy?

Once your floor is clean, you can either resand it (if necessary) and reseal it to prevent future clouding, or you can simply proceed to the waxing/buffing stage.

If the cloudiness is only on the surface of your epoxy coating, then a simple wax job will do. If you spot deeper cloudiness (meaning that your epoxy needs to be redone), then you’ll need to apply fresh epoxy before putting a fresh coat of wax on top of it.

If your goal is simply to fix cloudy epoxy, rather than prevent further cloudiness from happening in the future, then either option will work for you.

Keep in mind that both options are fairly labor-intensive. So if possible, we recommend choosing whichever option will also extend the lifespan of your floor coating and prevent future problems with its appearance.

How do you make resin clear again?

During the curing process, some epoxy resin can become foggy or cloudy. This is caused by heat and pressure that the mixture releases during its chemical reaction. Luckily, there are a few ways you can make your resin clear again!

  • Place your resin piece in a sunny spot for a few days. Since heat is one of the main causes of this problem, natural sunlight will help take care of it.
  • Use a hairdryer on low to medium heat for a few minutes to get rid of small white streaks and haze in your piece. You’ll want to move the hairdryer slowly over all areas where you see imperfections, but keep it at least 8 inches away from the surface of your piece so you don’t scorch or melt it!
  • Another solution is placing your resin on top of a piece of newspaper or paper towels in direct sunlight for about two days (or until it’s clear). It’s best not to put this outside when temperatures are below 0°C or 32°F because cold weather makes some epoxies brittle and prone to snapping off during curing!
  • If none of these options work, then try heating up some water with salt added into it until boiling before pouring it over top of your piece; this will create steam which will remove any cloudiness just like when we use hot air from our hairdryers!

How do you polish cloudy resin?

If your epoxy is looking a little cloudy, you can use wet sanding to bring back the shine. Wet sanding uses paper with grit on it to remove the top layer of coating. The lower grits are for heavy sanding and the high grits are for polishing. For heavy sanding, use 100-grit or 150-grit paper and get rid of any imperfections on the floor. Once you’re done with that, switch to 220-grit or 300-grit paper to buff out any scratches that the lower grits may have made.

After wet sanding, you can polish your epoxy floors by using a buffer or polisher machine. You can use a drill with a buffer attachment if you don’t have one lying around but it won’t be as effective as using a rotary buffer or hand buffer machine. With whichever type of power tool you choose, add some buffing compound to make sure that your floor is shiny and smooth when all is said and done!

If power tools aren’t your thing, then use elbow grease instead! Use soft cloths or rags to apply waxes after buffing them up until they get hot enough for spreading over large areas easily*; this will help polish away any imperfections in your epoxy floor so it looks shiny again.*


All you need are a broom and a damp mop, so it’s important to remember to keep your epoxy flooring as clean as possible. By cleaning up spills right away, you can avoid the possibility of stains or scratches that could ruin the shine of your floor. You also need to sweep or vacuum your floors every day and use a damp mop once per week.

Finally, don’t forget that there are many ways in which you can keep your epoxy floors shiny, including investing in quality floor mats or runners for high-traffic areas. If all else fails, consider hiring professional cleaners who know how to take care of this type of flooring safely and effectively!

Leave a Comment