How do I protect my epoxy table top?

Epoxy is a great way to protect your table top, but it can be tricky to apply correctly. Follow these steps and you’ll have the best looking epoxy on the block in no time!

What do you seal epoxy table with?

You’ll want to use a clear sealer. Polyurethane is the most common choice, but you can also choose a 2-part epoxy resin system if you want something more permanent and flexible. Waxworks well in certain situations, such as when using shellac.

How do you scratch proof an epoxy countertop?

To protect your countertop, you need to use a resin that is scratch resistant. The most common resins for this purpose are polyester or polyurethane resins. You can also use acrylate, which is less durable than the other two but also easier to apply. Here’s what you’ll need:

  • A 2-part epoxy resin
  • 1 part catalyst (hardener)
  • Paper towels or rags

How do you care for an epoxy resin table?

How do you seal a resin table top?

Apply the epoxy resin to your table using a paintbrush, foam brush, or roller. Cover the entire surface of the table with an even coating of epoxy.

Use a heat gun or blow dryer to remove any air bubbles that may have formed in your resin during application. Apply a second coat if needed.

What can I put on top of epoxy?

The best options for protecting your epoxy tabletop are UV Resistant Coatings, Waxes, Polyurethane, Polycrylic and Conversion Varnish. If you don’t want to apply anything on the surface of your table then it is best to use a sealer like oil or polyester resin.

If you want more durable protection against scratches and stains, consider putting lacquer or acrylic on top of the epoxy.

Do you need a seal coat for epoxy?

If you’re just setting your epoxy tabletop in place, then you probably don’t need a seal coat. However, if you want it to last longer and look better, then it may be worth investing in one. A seal coat will protect your tabletop from scratches and stains as well as water damage. It also helps prevent dirt build-up on top of the epoxy so that it doesn’t get trapped under the table top!

How do you take care of epoxy countertops?

  • Once you have finished your project, you should seal the epoxy with a layer of wax or polyurethane. This will protect it from damage and make it easier to clean.
  • Cleaning up after using your table top should be easy. You can use a damp cloth to wipe away any dust or debris accumulated on the surface, but be sure not to scrub too hard, as this could scratch or damage your table top.

How long do epoxy countertops last?

Epoxy countertops are tough, long-lasting beauties that can be enjoyed for many years. The secret to keeping them looking great is to keep them clean and protected from damage.

If you take care of your epoxy table top, it will last for many years. In fact, epoxy countertops are one of the best investments you’ll ever make in your home because they’re scratch resistant and easy to maintain—even if you have kids or pets!


So, you’ve read through the information above and you’re ready to get started with your epoxy table top. You have a few options for protecting it, but I would suggest using varnish as an exterior finish over your epoxy.

It’s important not to use anything that might react with the epoxy or change its color or consistency in any way—this means no polyurethane or other types of sealers like lacquer.

Varnish has long been used as a protective coating for wood products because of its ability to protect from moisture and wear while still allowing wood grain to show through clearly. It also gives finished pieces a nice warm glow that gives them a sense of warmth and makes them easier on the eye when looking at them closely.

The only downside is that it tends to yellow over time (like most finishes do), so you’ll have to keep reapplying it every few years if you want your table top looking its best!

Leave a Comment