can 2 part epoxy be sanded?

You’ve got yourself an epoxy resin job and you want to know if it’s possible to smooth out the surface. You’ve sanded the epoxy, but it still has a rough feel. You’re wondering if there’s something else you can do to make that finish more like glass. Well, I’m here to answer all those questions for you! Let’s get started…

Can you sand two part epoxy?

Yes, you can sand two-part epoxy, but it’s a little tricky. When you use a regular sanding block (the kind with rough grit), the sandpaper will tear up and clog up your sander/sanding pad very quickly. This is because two-part epoxy is hard as a rock when it sets, and since the sandpaper doesn’t have teeth like wood does to chip away at it, it just ends up tearing apart instead of smoothing out your surface like you would with regular wood.

The trick to getting around this issue is getting one of those fancy rotary tools that spin really fast when they’re turned on (I’m talking about Dremels here). These tools are great because they have tiny discs that spin quickly inside their housings, so when you attach them to your tool and turn them on they’ll grind down pretty much anything—including epoxy! The best part?

They don’t tear up or clog because they don’t have any sort of grit in them; instead, they use tiny discs that make quick work of whatever material needs grinding down without breaking down themselves!

Can you sand an epoxy finish?

You can sand an epoxy finish with any of the following:

  • Fine grit sandpaper. This will give you a smooth surface and make the epoxy look more like varnish.
  • Orbital sander. These are good for removing excess surface material, but they leave grains behind that can become visible when you apply another layer of Epoxy or other top coatings later on.
  • Sanding block. Use this method if you want to remove small amounts of material while also making sure your edges are smooth and rounded off so that there aren’t sharp corners where people could cut themselves on a table or countertop made from wood coated with epoxy resin.* Long-handled sanding blocks like those used by carpenters help make sure all areas get equal coverage without causing too much fatigue during use.* Sanding sponges are soft enough that they won’t scratch up surfaces yet durable enough not to wear out quickly after prolonged use.* Sanding pads come in different sizes depending on how large an area needs attention before getting cleaned up.* Sanding discs are better for rough surfaces because it creates less dust than using paper towels or rags would do when attempting similar tasks yourself at home

How do I sand a second coat of epoxy?

You should always sand the second coat of epoxy in the direction of the grain. This is one of the easiest ways to ensure you won’t leave any swirl marks behind.

You can use a sanding block or hand sander for this process, but be careful not to overdo it! If you’re using a belt sander or power sander, it would be best if you didn’t use them for this step because they will likely leave behind fine scratches in your project that could ruin your finish.

Disc sanders are also not recommended for this step because they can leave small ridges in areas where there is high friction from other parts of your project touching each other during assembly (in addition to any swirling).

Can epoxy be sanded and polished?

Sanding epoxy resin is a fairly simple process. First, you need to make sure that the surface is clean and free of any dust or oil. You can do this by wiping it down with a damp cloth and then letting it dry completely before applying the epoxy.

Next, apply your resin in multiple thin layers rather than one thick coat. The more coats that you apply, the smoother your final product will look when you begin sanding and polishing later on in the process.

A good way to test whether or not your surface is ready for sanding is by using a solvent paste-like acetone mixed with water which will dissolve any plastics stuck onto your project but won’t hurt any of the other materials (which could happen if normal household cleaners were used).

If there are no plastic parts present after using this method then it’s safe for you to apply some 120 grit paper onto whatever part needs smoothing out before moving on to next step which involves applying finer grits until everything looks smooth enough without being too rough on the edges/corners where they meet other surfaces

How do you make epoxy clear after sanding?

The first thing you have to do is make sure that you’re using the right kind of sandpaper. You will need to use fine-grade sandpaper, not a rough one. If you have access to a power sander at home or in your garage, use it! You can also buy sanding blocks for this purpose as well; they come with different grades of paper so that you can choose what’s right for the job.

Once your epoxy has been applied and allowed to cure (24 hours) then begin sanding by gently rubbing the surface with 100-150 grit sandpaper until all seams are removed, making sure not to press down too hard on any part of your workpiece. Remove dust using either compressed air or clean cloths moistened with mineral spirits before moving on to higher grit levels if needed.

How do you smooth out epoxy?

You can smooth out epoxy using high grit sandpaper, a sanding block, or one of these other tools:

  • Power sander. If you have access to power tools, this might be your best bet. The problem is that it’s messy and the dust can get everywhere.
  • Belt sander. This tool is similar to the power sander but will probably be easier on your hands since you’ll be able to hold it with both hands instead of just one hand like you would when using a palm sander or hand sander. It won’t have as much mobility because of what it’s connected to though (you’re connected by a belt).

What is the best sander for epoxy resin?

If you want to sand epoxy resin, you will need very fine sandpaper. Sanding sponges are also good for this task. A sanding block and power sander can be used as well. Some people prefer using other methods such as a belt sander or disc sander.

What is the best sandpaper for epoxy resin?

You can use fine-grit sandpaper if you want to smooth the surface of your epoxy resin, but be aware that you’ll need to use a high-grit number. If you’re looking to further refine your finish, use a high grit number with a low one or vice versa.

If you’re unsure of what type of sandpaper is best for your project, always ask yourself: “What am I trying to do?”


I hope this article has helped you get a better understanding of what it means when people ask the question “Can 2 part epoxy be sanded?” If you have any further questions about the process, please feel free to leave them in the comments section below.

Leave a Comment